thanks for helping arno, here is what i've found: On Tue, Dec 11, 2007 at 09:36:06PM +0100, Arno Lehmann wrote: > > First of all, it's quite important to know why it's been marked as > "Error". You can look that up in the log file Bacula, by default, > writes. A grep for the volume name should tell you something. >
10-Dec 09:03 molbio-sd JobId 18: Volume "002045L4" previously written, moving to end of data. 10-Dec 09:34 molbio-sd JobId 18: Error: Unable to position to end of data on device "LTO4" (/dev/nst0): ERR=dev.c:1355 ioctl MTFSF error on "LTO4" (/dev/nst0). ERR=Input/output error. 10-Dec 09:34 molbio-sd JobId 18: Marking Volume "002045L4" in Error in Catalog. 10-Dec 09:34 molbio-dir JobId 18: Using Volume "002044L4" from 'Scratch' pool. is this a tape failure? these are new LTO4 tapes. -- michael ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users