On Dec 23, 2007 11:10 PM, Jason A. Kates <[EMAIL PROTECTED]> wrote: > Has anybody had this issue where the auto changer is looking for the > same tape in two drives? > > This is part of a normal backup. > Bacula Version: 2.2.6 (10 November 2007) x86_64-unknown-linux-gnu redhat > Enterprise release. > > Normaly each drive would be using different tapes > > Autochanger "Autochanger" with devices: > "Drive-1" (/dev/nst0) > "Drive-2" (/dev/nst1) > Device "Drive-1" (/dev/nst0) is not open. > Device is BLOCKED waiting for mount of volume "JX2027L3", > Pool: Daily > Media type: LTO-3 > Drive 0 is not loaded. > Device "Drive-2" (/dev/nst1) is mounted with: > Volume: JX2027L3 > Pool: Daily > Media type: LTO-3 > Slot 7 is loaded in drive 1. > Total Bytes=496,623,458,304 Blocks=473,636 Bytes/block=1,048,534 > Positioned at File=498 Block=344 > ==== >
Yes, I had that a few times. For me this was fixed in the svn code (2.3.6) but I here Kern has backported this to the next release of 2.2.7 which should be out soon. John ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
