Anyone? Sorry to be a pest, but I can't seem to find anything in the
docs....
Jason Antman wrote:
> Hi,
>
> I have a small Bacula setup at home that's been running for a few
> months. I'm currently in college, and only home every other weekend (not
> this weekend). I do most of my backups to disk and only the important
> stuff to tape. I have two tape drives, both loaded with tape, figuring
> that when one tape fills up and I'm not home to change it, I can backup
> to the other drive.
>
> This morning, I was greeted with warnings that my tape had filled up.
> Looking in bacula-web, I confirm this:
>
> pool-tape
> Vol Name Status
> stor1-dds-A Full
> stor1-dlt-2 Append
>
> >From bacula-dir.conf:
> Storage {
> Name = STOR1-sd-st0
> Password = ***
> Address = STOR1.jasonantman.com
> SDPort = 9103
> Device = dev-STOR1-st0
> Media Type = DDS-4
> }
> Storage {
> Name = STOR1-sd-st1
> Password = ***
> Address = STOR1.jasonantman.com
> SDPort = 9103
> Device = dev-STOR1-st1
> Media Type = DLT7000
> }
>
> JobDefs {
> Name = Default1-Weekly-Tape
> Type = Backup
> Level = Full
> Schedule = WeeklyTapeSchedule
> Storage = STOR1-sd-st0
> Storage = STOR1-sd-st1
> Pool = pool-tape
> Messages = Daemon
> Priority = 15
> }
>
> from bconsole:
>
> Pool: pool-tape
> +---------+-------------+-----------+---------+----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
> | MediaId | VolumeName | VolStatus | Enabled | VolBytes |
> VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType |
> LastWritten |
> +---------+-------------+-----------+---------+----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
> | 15 | stor1-dds-A | Full | 1 | 22,973,690,880 |
> 66 | 2,592,000 | 1 | 0 | 0 | DDS-4 | 2008-01-27
> 03:09:06 |
> | 16 | stor1-dlt-2 | Append | 1 | 0 |
> 0 | 2,592,000 | 1 | 0 | 0 | DLT7000 | 0000-00-00
> 00:00:00 |
> +---------+-------------+-----------+---------+----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
>
>
> For jobdefs, given that I've defined:
> Storage = STOR1-sd-st0
> Storage = STOR1-sd-st1
> is there a way to force bacula to move to STOR1-sd-st1 when STOR1-sd-st0
> is full?
>
> Thanks,
> Jason
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
