> > > How am I supposed to know which autochanger slot to mount, when it
> > would
> > > seems bacula just randomly selects tapes from the pool (see
> attached
> > > screenshot)?
> > >
> > >
> > It should have told you in the console what tape it wanted to use.
> > However I have found in most cases when bacula is stuck like this
> just
> > issuing a mount on the tape drive (and not selecting a slot) gets
> > bacula to continue.
> >
> > John
sorry truncated...
*mount
Automatically selected Catalog: ITOS
Using Catalog "ITOS"
The defined Storage resources are:
1: LTO3-1
2: FileStorage
Select Storage resource (1-2): 1
Enter autochanger slot:
3905 Device "LTO3-1" (/dev/nsa0) open but no Bacula volume is mounted.
If this is not a blank tape, try unmounting and remounting the Volume.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
