John Drescher wrote: >> > 23-Feb 06:21 khyber-sd JobId 1843: 3304 Issuing autochanger "load slot >> > 1, drive 0" command. >> > >> > 23-Feb 06:26 khyber-sd JobId 1843: Fatal error: 3992 Bad autochanger >> > "load slot 1, drive 0": ERR=Child died from signal 15: Termination. >> > Results=Loading media from Storage Element 1 into drive 0...done >> > Program killed by Bacula watchdog (timeout) >> > >> > This is bacula 2.2.6. >> >> So I gather I am the only one to ever see this error. It seems more like a >> bacula >> error than an actual problem with the changer. I guess I'll restart bacula >> and hope >> for the best unless someone has a better idea. >> > I have never seen this error. I do have one question. Was the correct > tape actually loaded in the drive when this error occurred? How long > does your tape drive take to rewind a tape? Is it possible that the > rewind time + autochanger unload time + autochanger load time was > greater than 5 minutes? Also I believe you can make this 5 minute > limit larger.
That's a good idea. I increased the timeout in the changer script. But in my experience it doesn't take nearly 5 minutes for this to happen. The correct tape was loaded into the drive by the changer. It seems like the bacula process that does the loading died for some reason (after requesting the load) and so it timed out. At least that is how I interpret the error message, but maybe the message is giving me the wrong impression. Mark ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
