Problem resolved. The FC switch was acting up and due to that, the tape
backups went crazy while doing FC path failover. Replaced the switch and
everything is back to normal. Thanks!
On Tue, Jan 20, 2009 at 12:52 PM, Win Htin <win.h...@gmail.com> wrote:
> I'm seeing "st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1)"
> messages from "dmesg" command and checking the /var/log/messages file, I see
> the same. I was able to do "mt" commands a couple of hours ago, failed a few
> minutes ago and it is working again right now. Maybe I should restart the
> whole tape changer later on.
>
>
> On Tue, Jan 20, 2009 at 12:25 PM, John Drescher <dresche...@gmail.com>wrote:
>
>> On Tue, Jan 20, 2009 at 11:49 AM, Win Htin <win.h...@gmail.com> wrote:
>> > Hi folks,
>> >
>> > I received a "Backup Fatal Error" report from one of my prod backups
>> last
>> > evening. After going through the report, I noticed the initial volume
>> that
>> > was being used went in Error. Bacula loaded a new volume from scratch
>> pool,
>> > continued with the backups and after writing less than 18GB of data,
>> marked
>> > the new volume with "Full" status. This went on with 2 more new volumes
>> with
>> > very little data actually written to each volume. Any idea what
>> happened?
>> >
>> There is a problem communicating with the tape drive. This can be bad
>> hardware or a bad scsi driver. First take a look at your dmesg
>>
>>
>> John
>>
>
>
>
> --
> email : win.h...@gmail.com
> "The unexamined life is not worth living" -- Socrates
>
--
email : win.h...@gmail.com
"The unexamined life is not worth living" -- Socrates
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
