Selon John Drescher <dresche...@gmail.com>:
> On Wed, Jan 28, 2009 at 8:50 PM, <gui...@free.fr> wrote:
> >> Start by assigning the drives a different media type for LTO2 versus LTO3.
> >>
> >> John
> >>
> > Thanks !
> >
> > like this in sd.conf one ?
> >
> > Device {
> > Name = Drive-1 #
> > Drive Index = 0
> > Media Type = LT0-3
> > Archive Device = /dev/st0
> > AutomaticMount = yes; # when device opened, read it
> > AlwaysOpen = yes;
> > RemovableMedia = yes;
> > RandomAccess = no;
> > AutoChanger = yes
> > #
> > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > }
> >
> > Device {
> > Name = Drive-2 #
> > Drive Index = 1
> > Media Type = LTO-2
> > Archive Device = /dev/st1
> > AutomaticMount = yes; # when device opened, read it
> > AlwaysOpen = yes;
> > RemovableMedia = yes;
> > RandomAccess = no;
> > AutoChanger = yes
> > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > }
> > Device {
> > Name = Drive-3 #
> > Drive Index = 2
> > Media Type = LTO-3
> > Archive Device = /dev/st2
> > AutomaticMount = yes; # when device opened, read it
> > AlwaysOpen = yes;
> > RemovableMedia = yes;
> > RandomAccess = no;
> > AutoChanger = yes
> > Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> > }
> >
> >
>
> I believe this looks fine. According to your other email about
> labeling barcodes. I believe you need to make sure that the LTO2 and
> LTO3 media are labeled correctly. One way to do that is to only add 1
> type of media at a time and use the appropriate drive to label the
> media.
>
> I will try to answer you on the other thread on how to fix this
> labeling. And please excuse me if I am not being descriptive enough, I
> am very sleepy (had to get up early this morning to shovel snow/ice so
> the SO could get her car out of the driveway without hitting my car..)
>
> John
>
no thanks a lot !
hope you r well ...
in fact ... mixed configuration is a very bad idea ...
then i will remove LTO2 drive , it s will be better ...
simpler , us better .
Regards
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
