Has anyone else running Debian Lenny had/have this problem? Since upgrading from Debian Etch to Debian Lenny, I have found that "release Drive0" does not unrelease the tape (DEC DLT single tape) in 99% of occassions.
The message about drive waiting for sysop is still printed on the consol, but I now have to (99% of time) enter a "unmount Drive0" command at the console, before it will unload the tape. InitiallyI thought it might have been related to replacing the adaptec scsi card with a qlogic scsi card, which occurred at the same time as the distribution upgrade, but the adaptec card has returned to this system and the problem still persists. Does anyone have any ideas of causes? I suspect that yet another righteous dabble has been carried out in some application in Debian and this lack of functionlity in the scsi system is the result. ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users