--- On Thu, 4/8/10, Phil Stracchino <ala...@metrocast.net> wrote:
> On 04/08/10 14:05, Joseph Spenner > wrote: > > But when the backup runs at the default time, it uses > a different disk_xxxx file for each system being backed up > on the same day. So, in 1 day, client 1 will use > disk_0001 and client 2 will use disk_0002. I would > want client 1, client 2, and all future clients to use the > same disk on that day. Then, the next day, those same > clients use the next disk, and so on. > > > > I believe the problem is in the bacula-dir.conf and/or > bacula-sd.conf. > > > > Which setting would cause it to use a different > disk/device for every client on every run? > > > > I suspect it is at least 1 of the following: > > > > File Retention > > Job Retention > > AutoPrune > > Recycle > > Volume Retention > > I strongly doubt it has anything to do with any of those > settings. Why > not post your actual Pool and Storage definitions? > Then we won't have > to guess. > Phil: Thanks for the reply. Here's my Pool and Storage defs: ===== # Definition of file storage device Storage { Name = File Address = backula-va SDPort = 9103 Password = "somepass" Device = FileStorage Media Type = File } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes AutoPrune = yes Volume Retention = 1 days Use Volume Once = yes Maximum Volume Bytes = 1400G Maximum Volumes = 10 } ===== Thanks! ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users