> Hi all, > > Hoping someone could help me out. My department recently purchased a Dell > PowerVault TL2000 autochanger connected via SAS5. > > We are upgrading from a spectralogic AIT4 system. > > The sad part is the LTO-4 drive is running much slower than the AIT system. > I'm avg around 714k/s. I have been reading where others complain about only 35 > - 50 M/s instead of 120+. At this point I'd love to 35 - 50 M/s. > > I'm running Fedora 12 & Bacula 5.0.2 > This is all on a new server. The AIT system is running on Fedora 10 & Bacula > 5.0.0 > > All the config files are similar if not identical accept for hardware > settings. I just don't seem to understand why this is so slow. Any suggestions > would be appreciated. >
If it was a HP drive you would use HP Library & Tape Tools to run a bunch of tests on it and tell you if everything is good. Dell probably have a similar tool. That would at least tell you that the hardware was okay or not. James ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users