hello,
we are using a 2-drive autochanger.
both drives are configured almost identical
(except name,device) config see below.
we are running daily copy disk to tape jobs into
different copy pools.
problem:
bacula automatically chooses only Drive-1
and load/unloads tapes every day.
only if i mount appendable volumes into
both drives the are used for the rest of
the week.
how can i configure bacula to use empty
autoloader drives if available ???
regards
ulrich
ps: we are running bacula 5.0.2
bacula-sd.conf:
Autochanger {
Name = OVERLAND
Device = Drive-1, Drive-2
Changer Command = "/opt/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/changer
}
Device {
Name = Drive-1
Drive Index = 0
Media Type = LTO-4
Archive Device = /dev/nst0
AutomaticMount = yes
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
Autochanger = yes
...
}
Device {
Name = Drive-2
Drive Index = 1
Media Type = LTO-4
Archive Device = /dev/nst1
AutomaticMount = yes
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
Autochanger = yes
...
}
--
Ulrich Leodolter <[email protected]>
OBVSG
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users