Please stop bacula-sd (yes only the storage daemon) then Can you manually load the volume in the first tape drive (using the autochanger console) then issue the following command after the load is finished
bls -c /etc/bacula/bacula-sd.conf -V* -L /dev/nst0 Here is an example from my autochanger: dev6 ~ # bls -c /etc/bacula/bacula-sd.conf -V* -L /dev/nst0 bls: match.c:249-0 add_fname_to_include prefix=0 gzip=0 fname=/ bls: butil.c:282 Using device: "/dev/nst0" for reading. 16-Jul 17:10 bls JobId 0: Invalid slot=0 defined in catalog for Volume "*" on "LTO2-0" (/dev/nst0). Manual load may be required. 16-Jul 17:10 bls JobId 0: 3301 Issuing autochanger "loaded? drive 0" command. 16-Jul 17:10 bls JobId 0: 3302 Autochanger "loaded? drive 0", result: nothing loaded. 16-Jul 17:11 bls JobId 0: Ready to read from volume "A00020" on device "LTO2-0" (/dev/nst0). Volume Label: Id : Bacula 1.0 immortal VerNo : 11 VolName : A00020 PrevVolName : VolFile : 0 LabelType : VOL_LABEL LabelSize : 155 PoolName : Scratch MediaType : LTO-2 PoolType : Backup HostName : dev6 Date label written: 17-Oct-2006 16:29 bls: acquire.c:436-0 dir_update_vol_info. label=64 Vol=* John ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users