On 08/11/2010 04:36 PM, Pierre Bernhardt wrote: > Hello, > > is it possible to connect bscan to a postgresql database? I try to scan my > tapes > but bscan could not find the bacuala.db which says to me, that bscan do not > try > to connect to the postgresql db I given in the command line: > > r...@backup:/etc/bacula# bscan -vv -d 99 -c bacula-sd.conf -n bacula -u > bacula -P Mrdu9E4rlMO4lQ -h localhost:5433 -s -m -V > DLT-IV-034\|DLT-IV-035\|DLT-IV-036\|DLT-IV-037\|DLT-IV-038\|DLT-IV-039\|DLT-IV-040 > /dev/nst2m > bscan: stored_conf.c:675-0 Inserting director res: backup-mon > bscan: stored_conf.c:675-0 Inserting device res: SDLT-1 > bscan: stored_conf.c:675-0 Inserting device res: DEC TZ89 > bscan: stored_conf.c:675-0 Inserting device res: QUANTUM DLT8000 > bscan: butil.c:282 Using device: "/dev/nst2m" for reading. > bscan: acquire.c:107-0 MediaType dcr= dev=DLT IV > 11-Aug 16:28 bscan JobId 0: Invalid slot=0 defined in catalog for Volume > "DLT-IV-034" on "QUANTUM DLT8000" (/dev/nst2m). Manual load my be required. > 11-Aug 16:28 bscan JobId 0: 3301 Issuing autochanger "loaded? drive 1" > command. > 11-Aug 16:28 bscan JobId 0: 3302 Autochanger "loaded? drive 1", result is > Slot 7. > bscan: acquire.c:209-0 opened dev "QUANTUM DLT8000" (/dev/nst2m) OK > bscan: acquire.c:212-0 calling read-vol-label > bscan: reserve.c:313-0 jid=0 reserve_volume DLT-IV-034 > bscan: reserve.c:238-0 jid=0 new Vol=DLT-IV-034 at 80da140 dev="QUANTUM > DLT8000" (/dev/nst2m) > bscan: reserve.c:181-0 jid=0 List from end new volume: DLT-IV-034 at 80da140 > on device "QUANTUM DLT8000" (/dev/nst2m) > > Volume Label: > Id : Bacula 1.0 immortal > VerNo : 11 > VolName : DLT-IV-034 > PrevVolName : > VolFile : 0 > LabelType : VOL_LABEL > LabelSize : 162 > PoolName : Scratch > MediaType : DLT IV > PoolType : Backup > HostName : backup > Date label written: 25-Mai-2010 23:58 > 11-Aug 16:28 bscan JobId 0: Ready to read from volume "DLT-IV-034" on device > "QUANTUM DLT8000" (/dev/nst2m). > 11-Aug 16:28 bscan: ERROR TERMINATION at bscan.c:284 > sqlite.c:177 Database /var/lib/bacula/bacula.db does not exist, please create > it. > > I modified the -h -P -u and -n differently but nothing helps. Any idea? > I know the release is allready deprecated, but at the moment it works and I > need some time > to spend for an upgrade which I not have at the moment. > > Cheers.. > Pierre
Pierre you need to use a bscan utility compiled for postgresql, the one you used is for sqlite ... > sqlite.c:177 Database /var/lib/bacula/bacula.db does not exist, please create > it. That's why it was bugging :-) -- Bruno Friedmann br...@ioda-net.ch Ioda-Net Sàrl www.ioda-net.ch openSUSE Member User www.ioda.net/r/osu Blog www.ioda.net/r/blog fsfe fellowship www.fsfe.org (bruno.friedmann (at) fsfe.org ) tigerfoot on irc GPG KEY : D5C9B751C4653227 ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users