Hi John, Thanks for the very quick reply. I did actually try that, but i was expecting bscan to then request the autochanger to mount it itself.
When i umounted it in bacula, bscan requested me to mount it manually. Did you just use your autoloader buttons to manually mount it from the slot to the drive, or do i need to use something else (mtx?) to mount it outside of bacula for bscan to see it? Thanks. Dermot. On 17 August 2010 17:52, John Drescher <dresche...@gmail.com> wrote: > On Tue, Aug 17, 2010 at 11:31 AM, Dermot Beirne <dermot.bei...@dpd.ie> wrote: >> Hi, >> I'm trying to repopulate catalogue with tapes that appear to have >> their records pruned. >> >> When using bscan, I'm getting the following output: >> >> >> bac...@ho-bksrv-11139:/usr/local/bacula/bin$ sudo ./bscan -V 000046L4 >> -v -s -m -S -c /usr/local/bacula/bin/bacula-sd.conf /dev/nst0 >> [sudo] password for bacula: >> bscan: butil.c:282 Using device: "/dev/nst0" for reading. >> 17-Aug 16:15 bscan JobId 0: Invalid slot=0 defined in catalog for >> Volume "000046L4" on "LTO-4" (/dev/nst0). Manual load may be required. >> 17-Aug 16:15 bscan JobId 0: 3301 Issuing autochanger "loaded? drive 0" >> command. >> 17-Aug 16:15 bscan JobId 0: 3302 Autochanger "loaded? drive 0", result >> is Slot 3. >> 17-Aug 16:20 bscan JobId 0: Warning: acquire.c:221 Read open device >> "LTO-4" (/dev/nst0) Volume "000046L4" failed: ERR=dev.c:474 Unable to >> open device "LTO-4" (/dev/nst0): ERR=Device or resource busy >> >> 17-Aug 16:20 bscan JobId 0: Invalid slot=0 defined in catalog for >> Volume "000046L4" on "LTO-4" (/dev/nst0). Manual load may be required. >> Mount Volume "000046L4" on device "LTO-4" (/dev/nst0) and press return >> when ready: >> >> >> The volume is loaded in the drive, as shown here: >> >> Device status: >> Autochanger "Dell-PV124T" with devices: >> "LTO-4" (/dev/nst0) >> Device "FileStorage" (/disk-backup) is not open. >> Device "Daily" (/disk-backup/Daily) is not open. >> Device "Weekly" (/disk-backup/Weekly) is not open. >> Device "Monthly" (/disk-backup/Monthly) is not open. >> Device "Yearly" (/disk-backup/Yearly) is not open. >> Device "LTO-4" (/dev/nst0) is mounted with: >> Volume: 000046L4 >> Pool: Daily-Tape-Pool >> Media type: LTO-4 >> Slot 3 is loaded in drive 0. >> Total Bytes Read=129,024 Blocks Read=2 Bytes/block=64,512 >> Positioned at File=0 Block=0 >> ==== >> >> Used Volume status: >> 000046L4 on device "LTO-4" (/dev/nst0) >> Reader=0 writers=0 devres=0 volinuse=0 >> ==== >> >> >> Does anyone know how to get around the error? >> > > You need to unmount it in bacula to use bscan. > > John > > ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
