On Sep 5, 2010, at 11:03 PM, Richard Scobie <rich...@sauce.co.nz> wrote:
> Unless I have missed something, it appears that if you have an > autochanger full of tapes and it becomes unavailable for whatever reason > - say the PSU fails, there is no way of accessing the tapes in another > drive, as the system thinks are still loaded in the library and will not > allow a restore when mounted in another drive, due to "update slots" not > being able to be run. > > Surely if a tape is mounted in a drive and the label is read, this > should become the new location for this tape? Are you issuing a mount command after inserting the tape into the other drive? -- Dan Langille http://langille.org/ ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users