On Aug 23, 2011, at 8:43 AM, Adrian Reyer wrote: > On Tue, Aug 23, 2011 at 01:38:23AM +0200, Olle Romo wrote: >> What I mean is that if I have a drive removed, run the job then >> attach >> the drive and run the job again, Bacula will do a full backup of the >> drive even if it previously had done an incremental backup on the >> same >> drive. Ideally I want it to just continue the incremental backup. > > Use 2 filesets and 2 jobs. One like you have now, but exclude the > removable drive, The other only has the removable dribe and you only > run it when the drive is there, e.g. checked by a pre-script. > > Regards, > Adrian
That will be the way to go. Problem is I have quite a few drives that come and go in different combinations. I still wish I could control that particular behavior. Thanks for the tip :) Best, Olle ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
