Hi all After a good portion of bad luck with a freak combination of some less-than-ideal WD drives and a set of LSI SAS controllers/expanders, I seem to need to start over for at least two of my SDs. To cut the story short, the WD drives were kicked out by ZFS, usually quite a few on the same backlane/expander. The net result is that two zpools are quite unusable and the drives are being replaced by Hitachi drives (that have shown stable in other, similar setups, also where the WDs failed). Now, it's no use crying over spilt milk, some backups are gone, but we have snapshots back in time of the most important data. Still, I don't want to start over from scratch on all SDs at once. One (smallish) SD is released already, and I want to start off with that, nuking whatever info for that SD and the servers backing up there. Later, when I see that works, I'll start with the second, and finally, if I need to, I'll scratch the third and follow the same procedure. The smallish tos-backup's data is declared gone, and the zpool is replaced.
Ss, how do I do this? Is it sufficient to just remove the "tapes" from the media library? If so, should I use purge, delete or prune? What is the difference? And lastly, should I stick to bconsole for this type of job? Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. ------------------------------------------------------------------------------ Special Offer -- Download ArcSight Logger for FREE! Finally, a world-class log management solution at an even better price-free! And you'll get a free "Love Thy Logs" t-shirt when you download Logger. Secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsisghtdev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users