Am 15.09.2011 13:11, schrieb Martin Simmons: >>>>>> On Thu, 15 Sep 2011 12:10:54 +0200, Pierre Bernhardt said: >> >> Am 15.09.2011 10:32, schrieb Pierre Bernhardt: Hi,
> Does the mt load command pull the tape back into the drive? Bacula expects > the Mount Command to mount the tape. It's more like an offline command. The old DLT tape drives has no engine to eject a drive normally so you must normally pull an door to eject the drive manually. In libraries the tape roboter to that by the roboter leg or by an added engine at the drive. So if I use eject command to the drive the drive will unload the tape in the cartridge but the cartridge itself will be pull out by the roboter leg. So if the roboter will not pull out the cartridge the tape could be reloaded by an mt load command. For this drive I need the eject command before mtx can unload the cartrige because the lib will not send an eject command to the lib. In this case also after the eject of the tape in the cartridge is finished the roboter can open the drive door and pull out the cartrigde. I'm not sure how I did this in the past. I should look in the mtx-changer script because it is possible I did this with an modified script. MfG... Pierre ------------------------------------------------------------------------------ Doing More with Less: The Next Generation Virtual Desktop What are the key obstacles that have prevented many mid-market businesses from deploying virtual desktops? How do next-generation virtual desktops provide companies an easier-to-deploy, easier-to-manage and more affordable virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
