On Thu, Apr 19, 2012 at 3:47 AM, alexturner <bacula-fo...@backupcentral.com> wrote: > Hey all, > > I'm trying to set up a bacula sever to backup all machines on the network to > LTO tape. I'm having a hard time getting my config to work. For starters > bacula-dir wont start from the /etc/init.d/bacula-director script but it will > start if I simply run bacula-dir in the terminal. > > bacula-sd runs from the init script and is listening on all ip's (as > determined by netstat -alnp) though I can't connect to it. I've been trying > to run this for the last few weeks and I'm starting to give up, any ideas and > input would be highly appreciated. > > I've edited out a fair bit of text just to shorten the output. Sorry for not > uploading to a pastebin. > > Netstat: > root@bacula:/var/www# netstat -alnp | grep 9103 > tcp 0 0 0.0.0.0:9103 0.0.0.0:* LISTEN > 17140/bacula-sd > root@bacula:/var/www# > > Error: > *status > Status available for: > 1: Director > 2: Storage > 3: Client > 4: All > Select daemon type for status (1-4): 2 > Automatically selected Storage: bacula > Connecting to Storage daemon bacula at 127.0.0.1:9103 > > Failed to connect to Storage daemon bacula. > ==== > You have messages. > *messages > 19-Apr 17:38 localhost-dir JobId 0: Fatal error: authenticate.c:120 Director > unable to authenticate with Storage daemon at "127.0.0.1:9103". Possible > causes: > Passwords or names not the same or > Maximum Concurrent Jobs exceeded on the SD or > SD networking messed up (restart daemon). > Please see > http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 > for help. > * > > > > bacula-sd.conf > Storage { # definition of myself > Name = bacula > SDPort = 9103 # Director's port > WorkingDirectory = "/var/lib/bacula" > Pid Directory = "/var/run/bacula" > Maximum Concurrent Jobs = 20 > } > > # > # List Directors who are permitted to contact Storage daemon > # > Director { > Name = bacula-dir > Password = "helloworld" > } > > # > # Restricted Director, used by tray-monitor to get the > # status of the storage daemon > # > Director { > Name = bacula-mon > Password = "helloworld" > Monitor = yes > } > > Autochanger { > Name = HP-Changer > Device = LTO1-1 > Device = LTO1-2 > Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" > Changer Device = /dev/sg2 > } > > Device { > Name = LTO1-1 # > Drive Index = 0 > Media Type = LTO-1 > Archive Device = /dev/st0 > AutomaticMount = yes; # when device opened, read it > AlwaysOpen = yes; > RandomAccess = no; > AutoChanger = yes > # # > # # Enable the Alert command only if you have the mtx package loaded > # # Note, apparently on some systems, tapeinfo resets the SCSI controller > # # thus if you turn this on, make sure it does not reset your SCSI > # # controller. I have never had any problems, and smartctl does > # # not seem to cause such problems. > # # > # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" > # If you have smartctl, enable this, it has more info than tapeinfo > # Alert Command = "sh -c 'smartctl -H -l error %c'" > } > Messages { > Name = Standard > director = bacula-dir = all > } > > > Bacula-dir.conf > Director { # define myself > Name = localhost-dir > DIRport = 9101 > QueryFile = "/etc/bacula/scripts/query.sql" > WorkingDirectory = /var/lib/bacula > PidDirectory = "/var/run/bacula" > Maximum Concurrent Jobs = 1 > Password = "tralala" # Console password > Messages = Daemon > DirAddress = 127.0.0.1 > } > > JobDefs { > Name = "DefaultJob" > Type = Backup > Level = Incremental > Client = bacula-fd > FileSet = "Full Set" > Schedule = "WeeklyCycle" > Storage = bacula > Messages = Standard > Pool = File > Priority = 10 > Write Bootstrap = "/var/lib/bacula/%c.bsr" > } > > > # > # Define the main nightly save backup job > # By default, this job will back up to disk in > /nonexistant/path/to/file/archive/dir > Job { > Name = "BackupClient1" > JobDefs = "DefaultJob" > } > Storage { > Name = bacula > Address = 127.0.0.1 > SDPort = 9103 > Password = "KM0K1W1aF6w-G0NU181dVtedFUKDKn4QE" > Device = HP-Changer > Media Type = LTO-1 > Autochanger = yes > } > > Catalog { > Name = MyCatalog > # Uncomment the following line if you want the dbi driver > dbdriver = "dbi:mysql"; dbaddress = 127.0.0.1; dbport = 3306; > dbname = "bacula" > dbuser = "root" > dbpassword = "alexwashere" > } >
If you want bacula to function as a network backup program you need to remove 127.0.0.1 and localhost from all bacula config files and replace these with the eternal ipaddress otherwise bacula can not communicate on the network.. John ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users