Hello,
2015-06-29 8:08 GMT+02:00 scar <s...@drigon.com>:
> this is extremely frustrating! :(
> im reading the section about bscan[1],
No, you need a bextract command to restore all your configuration and your
catalog database backup from archive volumes (do you have your bsr files
somewhere, right?).
When you have a catalog database backup you can load it into your new and
fresh database instance. Then with restored config files you can
succesfully run your backup system. It should take about 15min to recover
(excluding OS installation and configuration, as you already have one)
depending on catalog database size.
If you lot all your bsr files, you need to check where your config files
and catalog database backups are located, which will take a lot of time. If
you do not perform a catalog database backup then you will need to use
bscan to populate all your backup metadata to catalog, which will take more
time again.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
