Ana, Just to confirm, your solution worked perfectly.
Thank you! Adam Clark [Recycle] Please consider the environment before printing this email and always recycle office paper From: Adam Clark [mailto:a...@eryjus.com] Sent: Friday, August 21, 2015 11:21 AM To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Catalog writing to wrong storage device Ana, Thanks again for your reply. I had figured that would be the case; I was just hoping for something a little more eloquent. Thank you! Adam Clark Eryjus Consulting, LLC [Recycle]Please consider the environment before printing this email and always recycle office paper From: Ana Emília M. Arruda [mailto:emiliaarr...@gmail.com] Sent: Friday, August 21, 2015 11:04 AM To: Adam Clark Cc: bacula-users@lists.sourceforge.net<mailto:bacula-users@lists.sourceforge.net> Subject: Re: [Bacula-users] Catalog writing to wrong storage device Hello Adam, There is a misunderstanding here. The volumes in bacula are "tied" to devices. This way you cannot have a volume in the directory mount point specified for the Zentyal-File device being used by another device with a different directory mount point (archive device). It is possible to have groups of devices grouped into the same storage (in bacula-dir.conf) using the same mount point or a virtual autochanger (you can find both strategies in http://blog.bacula.org/whitepapers/CommunityDiskBackup.pdf). This way, all your volumes will be in the same directory and they can be accessed by any of the devices (grouped or virtual autochanger). Because some operations will not work well in the group configuration, virtual autochangers are preferable. If you want to use different devices with different mount points, as you have configured, you will need different pools with volumes tied to them (you can define this in the pool and not in the schedule resource), for example: Pool ThuPool-1 for Zentyal-File storage and ThuPool-2 for Backup-File storage: Pool { Name = ThuPool-1 Pool Type = Backup Recycle = Yes AutoPrune = Yes Volume Retention = 6d Volume Use Duration = 1d Storage = Zentyal-File Label Format = "Thu-" } Pool { Name = ThuPool-2 Pool Type = Backup Recycle = Yes AutoPrune = Yes Volume Retention = 6d Volume Use Duration = 1d Storage = Backup-File Label Format = "Thu-" } Best regards, Ana On Fri, Aug 21, 2015 at 12:20 PM, Adam Clark <a...@eryjus.com<mailto:a...@eryjus.com>> wrote: Hello, My Catalog still did not make its first attempt to write to the proper volume, resulting in a volume in error. Here are the console messages for the catalog backup: 2015-08-20 23:55:02 BaculaDirector JobId 296: shell command: run BeforeJob "/usr/libexec/bacula/make_catalog_backup.pl<http://make_catalog_backup.pl> MyCatalog" 2015-08-20 23:55:03 BaculaDirector JobId 296: Start Backup JobId 296, Job=BackupCatalog.2015-08-20_23.55.00_49 2015-08-20 23:55:03 BaculaDirector JobId 296: Using Device "Backup-File" to write. 2015-08-20 23:55:03 bacula-sd JobId 296: Warning: Volume "Thu-0028" not on file device "Backup-File" (/backup). 2015-08-20 23:55:03 bacula-sd JobId 296: Marking Volume "Thu-0028" in Error in Catalog. 2015-08-20 23:55:04 bacula-sd JobId 296: Warning: Volume "Thu-0028" not on file device "Backup-File" (/backup). 2015-08-20 23:55:04 bacula-sd JobId 296: Marking Volume "Thu-0028" in Error in Catalog. 2015-08-20 23:55:04 bacula-sd JobId 296: Warning: mount.c:212 Open of file device "Backup-File" (/backup) Volume "Thu-0028" failed: ERR=file_dev.c:172 Could not open(/backup/Thu-0028,OPEN_READ_WRITE,0640): ERR=No such file or directory 2015-08-20 23:55:04 bacula-sd JobId 296: Volume "Thu-0010" previously written, moving to end of data. 2015-08-20 23:55:04 bacula-sd JobId 296: Ready to append to end of Volume "Thu-0010" size=8,163,946 2015-08-20 23:55:14 bacula-sd JobId 296: Elapsed time=00:00:10, Transfer rate=4.591 M Bytes/second 2015-08-20 23:55:14 bacula-sd JobId 296: Sending spooled attrs to the Director. Despooling 290 bytes ... 2015-08-20 23:55:14 BaculaDirector JobId 296: Bacula BaculaDirector 7.0.5 (28Jul14): Build OS: x86_64-redhat-linux-gnu redhat Two) JobId: 296 Job: BackupCatalog.2015-08-20_23.55.00_49 Backup Level: Full Client: "Bacula-Server" 7.0.5 (28Jul14) x86_64-redhat-linux-gnu,redhat,Two) FileSet: "Catalog" 2015-07-04 23:55:00 Pool: "ThuPool" (From Run Pool override) Catalog: "MyCatalog" (From Client resource) Storage: "Backup-File" (From run override) Scheduled time: 20-Aug-2015 23:55:00 Start time: 20-Aug-2015 23:55:03 End time: 20-Aug-2015 23:55:14 Elapsed time: 11 secs Priority: 11 FD Files Written: 1 SD Files Written: 1 FD Bytes Written: 45,913,490 (45.91 MB) SD Bytes Written: 45,913,606 (45.91 MB) Rate: 4174.0 KB/s Software Compression: None VSS: no Encryption: no Accurate: no Volume name(s): Thu-0010 Volume Session Id: 43 Volume Session Time: 1439603392 Last Volume Bytes: 54,112,032 (54.11 MB) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination: Backup OK 2015-08-20 23:55:14 BaculaDirector JobId 296: Begin pruning Jobs older than 6 months . 2015-08-20 23:55:14 BaculaDirector JobId 296: No Jobs found to prune. 2015-08-20 23:55:14 BaculaDirector JobId 296: Begin pruning Files. 2015-08-20 23:55:14 BaculaDirector JobId 296: No Files found to prune. 2015-08-20 23:55:14 BaculaDirector JobId 296: End auto prune. 2015-08-20 23:55:14 BaculaDirector JobId 296: shell command: run AfterJob "/usr/libexec/bacula/delete_catalog_backup" Please let me note that I really wanted the backup to write to Thu-0010 all along, but without setting Thu-0028 to error since this is my file server backup.
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
