Hi all,
It is quite frequent that my backup job ending up with the "The number of
files mismatch!" error. What could be the root cause of this?
Full error from log:
17-Oct 17:05 srv2-dir JobId 54: shell command: run BeforeJob
"/usr/lib64/bacula/make_catalog_backup.pl MyCatalog"
17-Oct 17:05 srv2-dir JobId 54: Start Backup JobId 54,
Job=ApplicationBackup_Server2.2016-10-17_17.05.04_04
17-Oct 17:05 srv2-dir JobId 54: Using Device "ibm-dds6"
17-Oct 17:05 srv2-sd JobId 54: Volume "srv2-set1-sun" previously written,
moving to end of data.
17-Oct 17:05 srv2-sd JobId 54: Error: Bacula cannot write on tape Volume
"srv2-set1-sun" because:
The number of files mismatch! Volume=0 Catalog=1
17-Oct 17:05 srv2-sd JobId 54: Marking Volume "srv2-set1-sun" in Error in
Catalog.
17-Oct 17:05 srv2-sd JobId 54: Please mount Volume "srv2-set2-sun" or label
a new one for:
Job: ApplicationBackup_Server2.2016-10-17_17.05.04_04
Storage: "ibm-dds6" (/dev/nst0)
Pool: SundayPool
Media type: DDS6
I am using IBM DDS6 tape. My sd, pool and job config:
https://dpaste.de/QBW9
Thanks.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
