Hello all,
I’m losing my mind over here as I do not know what Bacula wants from me. It’s
trying to run a job but is saying: Please mount append Volume "DK6452L4" or
label a new one”. The tape drive has that tape loaded, I’ve rebooted both the
tape drive and the Bacula server, the tape’s status is “Recycle” with the
Recycle flag set to 1.
I’ve tried doing a mount:
*mount storage=LTO4 slot=1
3001 OK mount requested. Specified slot ignored. Device="LTO4" (/dev/nst0)
It ignores it since slot 1 (the slot that has the tape it wants) is already
loaded in the drive. I’ve tried moving the tape out of the drive and back into
the slot, and re-running the job, which will load the proper tape and then give
me the same error.
List media shows this for that tape:
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten |
| 9,850 | DK6452L4 | Recycle | 1 | 1 | 0 |
5,184,000 | 1 | 1 | 1 | LTO4 | 2017-07-25 02:33:25 |
I’ve tried changing the volume’s status to “Append” instead of recycle with no
change in results.
Running Bacula version 7.0.5.
Any ideas? I can’t fathom what it wants me to do, since the tape is currently
loaded in the drive. Thanks!
-ryan
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
