Hello Davide
Yes. I followed all of your steps.
Enviado de Motorola Moto X2
Wanderlei Hüttel
Em qua, 27 de jun de 2018 08:29, Davide Franco <bacula-...@dflc.ch>
escreveu:
> Hello,
>
> This is really strange ...
>
> Here's below my repo configuration
>
> [Bacula]
> name=Bacula - Community
> baseurl=http://www.bacula.org/packages/xxxxxxxxxxxx/rpms/9.0.8/el7/x86_64
> enabled=1
> protect=0
> gpgcheck=1
>
> Then when I install bacula-postgresql
>
> # yum install bacula-postgresql
> Loaded plugins: fastestmirror
> Repository 'Bacula-Community' is missing name in configuration, using id
> Loading mirror speeds from cached hostfile
> * base: mirror1.hs-esslingen.de
> * extras: centos.bio.lmu.de
> * updates: centos.bio.lmu.de
> Bacula-Community
> | 2.9 kB 00:00:00
> Bacula-Community/primary_db
> | 15 kB 00:00:00
> Resolving Dependencies
> --> Running transaction check
> ---> Package bacula-postgresql.x86_64 0:9.0.8-2.el7 will be installed
> --> Processing Dependency: bacula-libs for package:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Processing Dependency: libbacfind-9.0.8.so()(64bit) for package:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Processing Dependency: libbaccfg-9.0.8.so()(64bit) for package:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Processing Dependency: libbac-9.0.8.so()(64bit) for package:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Running transaction check
> ---> Package bacula-libs.x86_64 0:9.0.8-2.el7 will be installed
> --> Finished Dependency Resolution
>
> Dependencies Resolved
>
>
> ===================================================================================================================================================================================
> Package
> Arch
> Version
> Repository Size
>
> ===================================================================================================================================================================================
> Installing:
> bacula-postgresql
> x86_64
> 9.0.8-2.el7
> Bacula-Community 3.0 M
> Installing for dependencies:
> bacula-libs
> x86_64
> 9.0.8-2.el7
> Bacula-Community 772 k
>
> Transaction Summary
>
> ===================================================================================================================================================================================
> Install 1 Package (+1 Dependent package)
>
> Total download size: 3.8 M
> Installed size: 3.8 M
> Is this ok [y/d/N]:
>
> Did you clear up your yum cache ?
>
> Best regards
>
> Davide
>
> On Wed, Jun 27, 2018 at 12:44 PM, Wanderlei Huttel <
> wanderleihut...@gmail.com> wrote:
>
>> Hello
>>
>> In the chapter 15, the correct command to import bacula key is:
>> rpm --import Bacula-4096-Distribution-Verification-key.asc
>>
>> Instead: rpm --import add Bacula-4096-Distribution-Verification-key.asc
>>
>>
>> I've followed Davide steps but MariaDB packages are still been showed as
>> dependencies
>>
>>
>> [root@bacula yum.repos.d]# yum install bacula-postgresql
>> Plugins carregados: fastestmirror
>> Loading mirror speeds from cached hostfile
>> * base: mirror.ci.ifes.edu.br
>> * epel: mirror.ci.ifes.edu.br
>> * extras: mirror.ci.ifes.edu.br
>> * updates: mirror.ci.ifes.edu.br
>> Resolvendo dependências
>> --> Executando verificação da transação
>> ---> O pacote bacula-postgresql.x86_64 0:9.0.8-2.el7 será instalado
>> --> Processando dependência: bacula-libs para o pacote:
>> bacula-postgresql-9.0.8-2.el7.x86_64
>> --> Processando dependência: perl(Logwatch) para o pacote:
>> bacula-postgresql-9.0.8-2.el7.x86_64
>> --> Processando dependência: libbac-9.0.8.so()(64bit) para o pacote:
>> bacula-postgresql-9.0.8-2.el7.x86_64
>> --> Processando dependência: libbaccfg-9.0.8.so()(64bit) para o pacote:
>> bacula-postgresql-9.0.8-2.el7.x86_64
>> --> Processando dependência: libbacfind-9.0.8.so()(64bit) para o pacote:
>> bacula-postgresql-9.0.8-2.el7.x86_64
>> --> Executando verificação da transação
>> ---> O pacote bacula-libs.x86_64 0:9.0.8-2.el7 será instalado
>> ---> O pacote bacula-mysql.x86_64 0:9.0.8-2.el7 será instalado
>> --> Processando dependência: mysql para o pacote:
>> bacula-mysql-9.0.8-2.el7.x86_64
>> --> Executando verificação da transação
>> ---> O pacote mariadb.x86_64 1:5.5.56-2.el7 será instalado
>> --> Resolução de dependências finalizada
>>
>> Dependências resolvidas
>>
>>
>> =====================================================================================================================================================================================================
>> Package Arq.
>> Versão Repo
>> Tam.
>>
>> =====================================================================================================================================================================================================
>> Instalando:
>> bacula-postgresql x86_64
>> 9.0.8-2.el7
>> Bacula-Community 3.0 M
>> Instalando para as dependências:
>> bacula-libs x86_64
>> 9.0.8-2.el7
>> Bacula-Community 772 k
>> bacula-mysql x86_64
>> 9.0.8-2.el7
>> Bacula-Community 3.0 M
>> mariadb x86_64
>> 1:5.5.56-2.el7 base
>> 8.7 M
>>
>> Resumo da transação
>>
>> =====================================================================================================================================================================================================
>> Instalar 1 Package (+3 Dependent packages)
>>
>> Tamanho total do download: 16 M
>> Tamanho depois de instalado: 74 M
>> Is this ok [y/d/N]:
>>
>>
>>
>> Best Regards
>>
>> *Wanderlei Hüttel*
>> www.bacula.com.br
>>
>> Em qua, 27 de jun de 2018 às 05:59, Davide Franco <bacula-...@dflc.ch>
>> escreveu:
>>
>>> Hello,
>>>
>>> It does works fine for me.
>>>
>>> Try to clean up your local yum cache and try again please.
>>>
>>> $ sudo yum clean all
>>> $ sudo rm -rm /var/yum/cache
>>> & sudo yum check-update
>>>
>>> Hope it helps
>>>
>>> Davide
>>>
>>> On Wed, 27 Jun 2018 at 10:33, Olivier Delestre <
>>> olivier.deles...@univ-rouen.fr> wrote:
>>>
>>>> And i test quickly and :(
>>>> Thanks for your works :)
>>>> ---
>>>> My Bacula.repo
>>>>
>>>> [Bacula-Community]
>>>> name=CentOS - Bacula - Community
>>>> baseurl=http://bacula.org/packages/xxxxxxxxxxxx/rpms/9.0.8/el7/x86_64
>>>> enabled=1
>>>> protect=0
>>>> gpgcheck=0
>>>>
>>>>
>>>>
>>>> ---
>>>> yum install bacula-postgresql
>>>> Loaded plugins: etckeeper, fastestmirror
>>>> Loading mirror speeds from cached hostfile
>>>> * epel: mirrors.ircam.fr
>>>> Resolving Dependencies
>>>> --> Running transaction check
>>>> ---> Package bacula-postgresql.x86_64 0:9.0.8-2.el7 will be installed
>>>> --> Processing Dependency: bacula-libs for package:
>>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>>> --> Processing Dependency: perl(Logwatch) for package:
>>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>>> --> Processing Dependency: libbac-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>>> --> Processing Dependency: libbaccfg-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>>> --> Processing Dependency: libbacfind-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>>> --> Running transaction check
>>>> ---> Package bacula-libs.x86_64 0:9.0.8-2.el7 will be installed
>>>> ---> Package bacula-mysql.x86_64 0:9.0.8-2.el7 will be installed
>>>> --> Processing Dependency: mysql for package:
>>>> bacula-mysql-9.0.8-2.el7.x86_64
>>>> --> Running transaction check
>>>> ---> Package mariadb.x86_64 1:5.5.56-2.el7 will be installed
>>>>
>>>> --> Finished Dependency Resolution
>>>>
>>>> Dependencies Resolved
>>>>
>>>>
>>>> =================================================================================================================================================================================
>>>> Package
>>>> Arch
>>>> Version
>>>> Repository Size
>>>>
>>>> =================================================================================================================================================================================
>>>> Installing:
>>>> bacula-postgresql
>>>> x86_64
>>>> 9.0.8-2.el7
>>>> Bacula-Community 3.0 M
>>>> Installing for dependencies:
>>>> bacula-libs
>>>> x86_64
>>>> 9.0.8-2.el7
>>>> Bacula-Community 772 k
>>>> bacula-mysql
>>>> x86_64
>>>> 9.0.8-2.el7
>>>> Bacula-Community 3.0 M
>>>> mariadb
>>>> x86_64
>>>> 1:5.5.56-2.el7
>>>> base 8.7 M
>>>>
>>>> Transaction Summary
>>>>
>>>> =================================================================================================================================================================================
>>>> Install 1 Package (+3 Dependent packages)
>>>>
>>>> Total size: 16 M
>>>> Total download size: 6.8 M
>>>> Installed size: 74 M
>>>>
>>>> Is this ok [y/d/N]: y
>>>> Downloading packages:
>>>> Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
>>>> bacula-libs-9.0.8-2.el7.x86_64 FAILED
>>>>
>>>> http://bacula.org/packages/xxxxxxxxxxx/rpms/9.0.8/el7/x86_64/bacula-libs-9.0.8-2.el7.x86_64.rpm:
>>>> [Errno 14] HTTP Error 416 - Requested Range Not Satisfiable 0 B --:--:--
>>>> ETA
>>>> Trying other mirror.
>>>> bacula-mysql-9.0.8-2.el7.x86_6 FAILED
>>>>
>>>> http://bacula.org/packages/xxxxxxxxxxxxxxxxxxx/rpms/9.0.8/el7/x86_64/bacula-mysql-9.0.8-2.el7.x86_64.rpm:
>>>> [Errno 14] HTTP Error 416 - Requested Range Not Satisfiable0 B --:--:--
>>>> ETA
>>>> Trying other mirror.
>>>> bacula-postgresql-9.0.8-2.el7. FAILED
>>>>
>>>> http://bacula.org/packages/xxxxxxxxxxxxxxxxxxxxxx/rpms/9.0.8/el7/x86_64/bacula-postgresql-9.0.8-2.el7.x86_64.rpm:
>>>> [Errno 14] HTTP Error 416 - Requested Range Not Satisfiable--:--:-- ETA
>>>> Trying other mirror.
>>>>
>>>>
>>>> Error downloading packages:
>>>> bacula-mysql-9.0.8-2.el7.x86_64: [Errno 256] No more mirrors to try.
>>>> bacula-libs-9.0.8-2.el7.x86_64: [Errno 256] No more mirrors to try.
>>>> bacula-postgresql-9.0.8-2.el7.x86_64: [Errno 256] No more mirrors to
>>>> try.
>>>>
>>>>
>>>>
>>>>
>>>> Le 27/06/2018 à 09:35, Davide Franco a écrit :
>>>>
>>>> Hello,
>>>>
>>>> The MySQL dependency problem on bacula-postgresql rpm package has been
>>>> fixed now.
>>>>
>>>> rpm binary packages for rhel7-64 (compatible with Centos 7) are now
>>>> available in Bacula repository.
>>>> The package name is bacula-postgresql-9.0.8-2.el7
>>>>
>>>> More rpm based distro packages will be uploaded within the next few
>>>> days.
>>>>
>>>> You might need to update your local repo by running this command
>>>>
>>>> $ sudo yum check-update
>>>>
>>>> Please note also that the baseurl for rhel7 repository should be as
>>>> below
>>>>
>>>> baseurl=
>>>> http://www.bacula.org/packages/xxxxxxxxxxxxxxxxx/rpms/9.0.8/el7/x86_64
>>>> instead of
>>>> baseurl=http://www.bacula.org/packages/xxxxxxxxxxxxxxxxx/rpms/9.0.8/el7
>>>>
>>>> The manual should be fixed accordingly.
>>>>
>>>> Hope it helps
>>>>
>>>> Best regards
>>>>
>>>> Davide
>>>>
>>>> On Tue, Jun 19, 2018 at 2:11 PM, Olivier Delestre <
>>>> olivier.deles...@univ-rouen.fr> wrote:
>>>>
>>>>> Hi, i have some problem to install bacula 9.0.8 on CentOs 7.5 x64.
>>>>> I Want a PostgreSql but when i run the install command, see the result
>>>>> below.
>>>>>
>>>>> Why i have a bacula-mysql dependency ?? ( no gpg check for the moment )
>>>>> a problem with the Rpm ??
>>>>>
>>>>> Thanks for your help.
>>>>> ---
>>>>>
>>>>> bacula.repo :
>>>>> [Bacula-Community]
>>>>> name=CentOS - Bacula - Community
>>>>> baseurl=
>>>>> http://www.bacula.org/packages/xxxxxxxxxxxxxxxxx/rpms/9.0.8/el7/
>>>>> enabled=1
>>>>> protect=0
>>>>> gpgcheck=0
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> yum install bacula-postgresql
>>>>> Loaded plugins: etckeeper, fastestmirror
>>>>> Loading mirror speeds from cached hostfile
>>>>> * epel: mirrors.ircam.fr
>>>>> Resolving Dependencies
>>>>> --> Running transaction check
>>>>> ---> Package bacula-postgresql.x86_64 0:9.0.8-1.el7 will be installed
>>>>> --> Processing Dependency: bacula-libs for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: perl(Logwatch) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: libbac-9.0.8.so()(64bit) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: libbaccfg-9.0.8.so()(64bit) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: libbacfind-9.0.8.so()(64bit) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: libbaccats-9.0.8.so()(64bit) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Running transaction check
>>>>> ---> Package bacula-libs.x86_64 0:9.0.8-1.el7 will be installed
>>>>> ---> Package bacula-mysql.x86_64 0:9.0.8-1.el7 will be installed
>>>>> --> Finished Dependency Resolution
>>>>>
>>>>> Dependencies Resolved
>>>>>
>>>>>
>>>>> =================================================================================================================================================================================
>>>>> Package
>>>>> Arch
>>>>> Version
>>>>> Repository Size
>>>>>
>>>>> =================================================================================================================================================================================
>>>>> Installing:
>>>>> bacula-postgresql
>>>>> x86_64
>>>>> 9.0.8-1.el7
>>>>> Bacula-Community 3.0 M
>>>>> Installing for dependencies:
>>>>> bacula-libs
>>>>> x86_64
>>>>> 9.0.8-1.el7
>>>>> Bacula-Community 772 k
>>>>> bacula-mysql
>>>>> x86_64
>>>>> 9.0.8-1.el7
>>>>> Bacula-Community 3.0 M
>>>>>
>>>>> Transaction Summary
>>>>>
>>>>> =================================================================================================================================================================================
>>>>> Install 1 Package (+2 Dependent packages)
>>>>>
>>>>> Total size: 6.8 M
>>>>> Total download size: 3.8 M
>>>>> Installed size: 26 M
>>>>> Is this ok [y/d/N]: n
>>>>> Exiting on user command
>>>>> Your transaction was saved, rerun it with:
>>>>> yum load-transaction /tmp/yum_save_tx.2018-06-19.13-59.UcII_r.yumtx
>>>>> [root@sambourg etc]# yum install bacula-postgresql
>>>>> Loaded plugins: etckeeper, fastestmirror
>>>>> Loading mirror speeds from cached hostfile
>>>>> * epel: mirrors.ircam.fr
>>>>> Resolving Dependencies
>>>>> --> Running transaction check
>>>>> ---> Package bacula-postgresql.x86_64 0:9.0.8-1.el7 will be installed
>>>>> --> Processing Dependency: bacula-libs for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: perl(Logwatch) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: libbac-9.0.8.so()(64bit) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: libbaccfg-9.0.8.so()(64bit) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: libbacfind-9.0.8.so()(64bit) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Processing Dependency: libbaccats-9.0.8.so()(64bit) for package:
>>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>>> --> Running transaction check
>>>>> ---> Package bacula-libs.x86_64 0:9.0.8-1.el7 will be installed
>>>>> ---> Package bacula-mysql.x86_64 0:9.0.8-1.el7 will be installed
>>>>> --> Finished Dependency Resolution
>>>>>
>>>>> Dependencies Resolved
>>>>>
>>>>>
>>>>> =================================================================================================================================================================================
>>>>> Package
>>>>> Arch
>>>>> Version
>>>>> Repository Size
>>>>>
>>>>> =================================================================================================================================================================================
>>>>> Installing:
>>>>> bacula-postgresql
>>>>> x86_64
>>>>> 9.0.8-1.el7
>>>>> Bacula-Community 3.0 M
>>>>> Installing for dependencies:
>>>>> bacula-libs
>>>>> x86_64
>>>>> 9.0.8-1.el7
>>>>> Bacula-Community 772 k
>>>>> bacula-mysql
>>>>> x86_64
>>>>> 9.0.8-1.el7
>>>>> Bacula-Community 3.0 M
>>>>>
>>>>> Transaction Summary
>>>>>
>>>>> =================================================================================================================================================================================
>>>>> Install 1 Package (+2 Dependent packages)
>>>>>
>>>>> Total size: 6.8 M
>>>>> Total download size: 3.8 M
>>>>> Installed size: 26 M
>>>>> Is this ok [y/d/N]: y
>>>>> Downloading packages:
>>>>> (1/2):
>>>>> bacula-libs-9.0.8-1.el7.x86_64.rpm
>>>>> | 772 kB 00:00:00
>>>>> (2/2):
>>>>> bacula-mysql-9.0.8-1.el7.x86_64.rpm
>>>>> | 3.0 MB 00:00:00
>>>>>
>>>>> ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>>> Total
>>>>> 6.7 MB/s | 3.8 MB 00:00:00
>>>>> Running transaction check
>>>>> Running transaction test
>>>>>
>>>>>
>>>>> Transaction check error:
>>>>> file /opt/bacula/lib64/libbaccats-9.0.8.so conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/lib64/libbacsd-9.0.8.so conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/bacula_config conflicts between attempted
>>>>> installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/create_bacula_database conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/drop_bacula_database conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/drop_bacula_tables conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/grant_bacula_privileges conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/make_bacula_tables conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/make_catalog_backup conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/make_catalog_backup.pl conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>> file /opt/bacula/scripts/update_bacula_tables conflicts between
>>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>>
>>>>> Error Summary
>>>>> -------------
>>>>> "
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> Bacula-users mailing list
>>>>> Bacula-users@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>
>>>>>
>>>>
>>>>
>>> ------------------------------------------------------------------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> Bacula-users mailing list
>>> Bacula-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>
>>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
