On 2/20/19 5:23 PM, Andrea Venturoli wrote:
Hello.
I've got such a NAS where I've been running bacula-sd 7.4.0 (self
compiled from sources) for years.
Now I'm trying to upgrade to 9.2.2 (same Director, same SD config file,
same compilation procedure).
The daemon starts, but Director cannot connect.
Setting debug to 1000 I see (as soon as I issue "status storage"):
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
backup-xxxxxx-sd: bnet_server.c:184-0 Accept=-1 errno=38
> ... (and so on in a loop)...
On a similar NAS (just a little newer), everything works fine.
Any hint on this?
For the record:
_ I tried upgrading to 9.4.2, but I got the same error;
_ I solved this by changing "baccept" to "accept" (as it was in 7.x) in
bnet_server.c.
bye
av.
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
