Revised...
[3:0:2:0] tape IBM ULT3580-TD4 C7QH /dev/st0 /dev/sg47
[3:0:2:1] mediumx IBM 3573-TL C.20 /dev/sch0 /dev/sg48
Use the sg names instead?
Jasen M. Lentz, M.Ed
Lead Systems Administrator
Sesco Enterprises, LLC
4977 State Route 30 East (Mailing Address Only)
Greensburg, PA 15601
W: (724) 837-1991 x207
C: (412) 848-5612
-----Original Message-----
From: Alan Brown <a.br...@ucl.ac.uk>
Sent: Wednesday, June 19, 2019 1:09 PM
To: Jasen Lentz <jle...@sescollc.com>; William Muriithi
<will...@perasotech.com>; Heitor Faria <hei...@bacula.com.br>
Cc: bacula-users <bacula-users@lists.sourceforge.net>
Subject: Re: [Bacula-users] IBM LTO-4 TS3200 Changer
On 19/06/2019 17:53, Jasen Lentz wrote:
> Ok, got them installed and lin_tape completely removed. The drive is
> /dev/st0 and the changer is /dev/sch0. I have a feeling I am close, but
> missing something as it seems to not see the slots in my autoloader:
Ignore /dev/sch0 - that's using the ch driver which bacula doesn't support (nor
does mtx)
lsscsci -g to find the changer, and use the appropriate /dev/sg entry
test using "mtx -f /dev/sg{N} status"
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
