I'm running version 9.0.6 on debian stretch
I have a tape library with two drives configured as follows in
bacula-sd.conf. I run 10 jobs every night and they always all run on
Drive-1. I'm now having a problem with that Drive and would like to force
all jobs to run on Drive-2. What's the easiest way to do that?
Thanks
#
# An autochanger device with two drives
#
Autochanger {
Name = Autochanger
Device = Drive-1
Device = Drive-2
Changer Command = "/soft/general/bacula-9.0.6/conf/mtx-changer %c %o %S
%a %d"
#Changer Device = /dev/sg0
Changer Device = /dev/changer
}
Device {
Name = Drive-1
Media Type = LTO-7
Archive Device = /dev/tapedrive1
#Archive Device = /dev/tape/by-id/scsi-350014380272c4ac9-nst # points to
nst1
Drive Index = 0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Maximum File Size = 50GB
# Maximum Block Size = 1048576
Maximum Block Size = 524288
# Maximum Block Size = 262144
#Maximum Network Buffer Size = 65536
Changer Command = "/soft/general/bacula-9.0.6/conf/mtx-changer %c %o %S
%a %d"
Changer Device = /dev/changer
#Changer Device = /dev/sg0
AutoChanger = yes
Spool Directory = /bacula/spool/
#
# New alert command in Bacula 9.0.0
# Note: you must have the sg3_utils (rpms) or the
# sg3-utils (deb) installed on your system.
# and you must set the correct control device that
# corresponds to the Archive Device
Control Device = /dev/tapescsi1 # must be SCSI ctl for /dev/nst0
Alert Command = "/soft/general/bacula-9.0.6/conf/tapealert %l"
# Enable the Alert command only if you have the mtx package loaded
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
#Alert Command = "sh -c 'smartctl -H -l error %c'"
}
Device {
Name = Drive-2
Drive Index = 1
Media Type = LTO-7
Archive Device = /dev/tapedrive2
#Archive Device = /dev/tape/by-id/scsi-350014380272c4acc-nst # points to
nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Maximum File Size = 50GB
# Maximum Block Size = 1048576
Maximum Block Size = 524288
# Maximum Block Size = 262144
#Maximum Network Buffer Size = 65536
Changer Command = "/soft/general/bacula-9.0.6/conf/mtx-changer %c %o %S
%a %d"
Changer Device = /dev/changer
#Changer Device = /dev/sg0
AutoChanger = yes
Spool Directory = /bacula/spool/
#
# New alert command in Bacula 9.0.0
# Note: you must have the sg3_utils (rpms) or the
# sg3-utils (deb) installed on your system.
# and you must set the correct control device that
# corresponds to the Archive Device
Control Device = /dev/tapescsi2 # must be SCSI ctl for /dev/nst0
Alert Command = "/soft/general/bacula-9.0.6/conf/tapealert %l"
# Enable the Alert command only if you have the mtx package loaded
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
#Alert Command = "sh -c 'smartctl -H -l error %c'"
}
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
