Hi Radosław ,
yes my linux is able to recognize . Please see below
mtx -f /dev/changer status
Storage Changer /dev/changer:2 Drives, 49 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
Data Transfer Element 1:Full (Storage Element 25 Loaded):VolumeTag = NY0175M8
Storage Element 1:Full :VolumeTag=NY0155M8
Storage Element 2:Full :VolumeTag=NY0156M8
Storage Element 3:Empty:VolumeTag=
lsscsi -g | grep mediumx
[1:0:3:1] mediumx QUANTUM Scalar i3-i6 260G /dev/sch0 /dev/sg8
lrwxrwxrwx 1 root root 3 Mar 27 00:00 changer-sg8 -> sg8
lrwxrwxrwx 1 root root 3 Mar 27 00:00 changer -> sg8
Best Regards
Vikrant
________________________________
From: Radosław Korzeniewski <rados...@korzeniewski.net>
Sent: Tuesday, March 30, 2021 12:53 PM
To: Vikrant Agarwal <vikran...@hotmail.com>
Cc: bacula-users@lists.sourceforge.net <bacula-users@lists.sourceforge.net>
Subject: Re: [Bacula-users] After upgrading Library firmware drives not working
Hello,
wt., 30 mar 2021 o 05:40 Vikrant Agarwal
<vikran...@hotmail.com<mailto:vikran...@hotmail.com>> napisał(a):
Hi All , After upgrading firmware on the quantum to the newest , the Drives
doesn’t seems to be getting reconzied on the bacula . Getting below error ,
Any advice and help please ?
Enter autochanger drive[0]:
Enter autochanger slot: 48
3307 Issuing autochanger "unload slot 49, drive 0" command.
3995 Bad autochanger "unload slot 49, drive 0": ERR=Child exited with code 1
Results=Unloading drive 0 into Storage Element 49...mtx: Request Sense: Long
Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Illegal Request
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 53
mtx: Request Sense: Additional Sense Qualifier = 01
mtx: Request Sense: Field in Error = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=yes
mtx: Request Sense: Field Pointer = 00 00
MOVE MEDIUM from Element Address 256 to 4144 Failed
3901 Unable to open device ""Drive-0" (/dev/sg2)": ERR=dev.c:513 Unable to open
device "Drive-0" (/dev/sg2): ERR=Operation not permitted
Are you absolutely sure that your autochanger/robot is at /dev/sg2 now?
You can always check if your system recognizes your tape library using
commands: lsscsi and mtx. If all in with these commands will work fine then
Bacula will work too.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net<mailto:rados...@korzeniewski.net>
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
