On 5/25/22 21:19, William Muriithi wrote:
Hello,I have a problem that I don't seem to understand. Backups stopped because they needed a specific tape. However, the tape is already in the drive.I can't mount it, since its already in place. What would trigger bacula into this logic? Device status: Autochanger "SuperLoader3" with devices: "ULTRIUM-HH7" (/dev/nst0) Device Tape is "ULTRIUM-HH7" (/dev/nst0) waiting for: Volume: 000024L7 Pool: eng_father Media type: LTO-6 Total Bytes Read=0 Blocks Read=0 Bytes/block=0 Positioned at File=1 Block=0 Device is BLOCKED waiting for media. Slot 16 is loaded in drive 0. == ==== Used Volume status: Reserved volume: 000024L7 on Tape device "ULTRIUM-HH7" (/dev/nst0) Reader=0 writers=4 reserves=1 volinuse=0 ==== Data spooling: 4 active jobs, 3,422,884,983,811 bytes; 29 total jobs, 3,422,884,983,811 max bytes/job. Attr spooling: 4 active jobs, 0 bytes; 29 total jobs, 2,575,911,306 max bytes.
Hello William,We will need to see the entire joblog to even have a clue. Also maybe the status of what Bacula knows about the autochanger slots:
* status director * status storage *ll joblog jobid=xxxx Note: If you have an older version of Bacula, 'll' might not be available. Use 'llist' (yes, two letter els) in this case. Best regards, Bill -- Bill Arlofski w...@protonmail.com
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users