Dear Adam ! I recently tested ltfs and it works as expected. Manually load your tapes with mtx, format the tapes for ltfs and then you can just mount the tape like a disk. I used Quantum LTO-7 drives, worked flawlessly.
I installed ltfs on a debian bullseye (11.5) machine by compiling from source. Its actually easy, this where the steps i had to take: > sudo apt install automake autoconf libtool fuse uuid libxml2 snmp > libicu67 pkg-config icu-devtools libfuse-dev libxml2-dev uuid-dev > libsnmp-dev > > git clone https://github.com/LinearTapeFileSystem/ltfs.git > cd ltfs > ./autogen.sh > ./configure > make > sudo make install > sudo ldconfig -v You might need a few more packages, depending on the state of your machine. Hope this helps, regards, karl Am Montag, dem 14.11.2022 um 18:44 +0000 schrieb Adam Weremczuk: > Hi, > > Has anybody had much success with it? > > This is the closest thing that I've managed to find: > https://github.com/LinearTapeFileSystem/ > > Only Debian 10 version with no updates for almost 2 years 🙁 > > My tape drive is Quantum LTO8 HH SAS External and works pretty well > with > WS 2019. > > Regards, > Adam > > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
