I try to set up a HP 1x8 Changer and an LTO drive.
I defined it in
* bacula-sd.conf
Device {
Name = "HP-LTO7"
MediaType = "LTO-4"
DeviceType = "Tape"
ArchiveDevice = "/dev/nst0"
LabelMedia = yes
AlwaysOpen = yes
Autochanger = yes
MaximumFileSize = 20000000000
}
Autochanger {
Name = "HP Autoloader"
Description = "HP 1x8 Autoloader"
Device = "HP-LTO7"
ChangerDevice = "/dev/tape/by-id/scsi-350014380032d5e60-changer"
ChangerCommand = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
}
and in
* bacula-dir.conf
Storage {
Name = "HP Autoloader"
SdPort = 9103
Address = "localhost"
Password = "xxxxx"
Device = "HP Autoloader"
MediaType = "LTO-4"
Autochanger = yes
MaximumConcurrentJobs = 10
}
That works, backups write and restores read from tapes!
I want to be able to manage the autochanger in Baculum-11.0.6, so I
tried to copy the cfg from bacula-dir.
Currently I even see the drive and the Changer slots in baculum, but for
example I cannot "Unload" the current tape. Why?
# cat /etc/bacula/baculum/Config-api-apache/devices.conf
[HP-LTO7]
type = "device"
device = "/dev/nst0"
index = "0"
[HP Autoloader]
type = "autochanger"
device = "/dev/tape/by-id/scsi-350014380032d5e60-changer"
command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
use_sudo = "1"
drives = "HP-LTO7"
My understanding is:
configure bacula-sd, then bacula-dir, test via bconsole
then proceed to copy the config into baculum
This is a debian-12.4 host with bacula from the debian repos, and
baculum from "http://www.bacula.org/downloads/baculum/stable-11/debian";
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
