On 6/15/25 2:19 AM, Dr. Thorsten Brandau via Bacula-users wrote:
As this surprisingly looked more like a changer, despite the error code=70, I changed the changer path in bacula-sd.conf to / dev//sg8Then I ran a backup (catalogue to make it quick): *And to my surprise - the backup worked again. *Now, this is a big surprise. I would not check the devices if despite many reboots (both, host and changer) all of a sudden the device is not correct. To be honest, that would probably be something I would not have looked into....
heh I had made the assumption that you had checked into this (dev node changing after reboot), hence my comment about doubting this could be the issue in your case. :)
It is always the first thing I would point someone to, but I failed to make that first step in this case. Sorry... And thanks to Udo for making this verification. :)
But... I don't like seeing the error outputs from the mtx commands though. I wonder i f you do: # mtx -f /dev/sg8 status # echo $? And see if mtx is exiting with an exit code other than 0.This would probably cause issues, especially in my replacement script since I check for exit codes of all utilities that get called. I'll see if I can find some time to test a few things here - it's been a long time since I have even looked at that script. :)
Best regards, Bill -- Bill Arlofski w...@protonmail.com
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
