Hello, I have some problems. May you please send me a binary produced with this tool? I want to inspect the flash header.
-- Gebhardt Von: Matthias Fend <matthias.f...@wolfvision.net> An: "guenter.gebha...@rafi.de" <guenter.gebha...@rafi.de>, "barebox@lists.infradead.org" <barebox@lists.infradead.org> Datum: 26.03.2012 11:09 Betreff: AW: imx53 internal boot from NAND Hi, For a quick start you can use the provided FCB (fcb.bin). This FCB was generated with the attached tool (fcbgen.c) - note that the bad block handling is disabled. Then you can "merge" your barebox image with the FCB with something like: cat fcb.bin barebox-image > barebox-fcb.bin This works at least on our custom i.MX53 hardware. ~Matthias Von: barebox-boun...@lists.infradead.org [ mailto:barebox-boun...@lists.infradead.org] Im Auftrag von guenter.gebha...@rafi.de Gesendet: Montag, 26. März 2012 10:48 An: barebox@lists.infradead.org Betreff: imx53 internal boot from NAND Hello, I tried to use barebox in order to boot from NAND. The ROM loader needs a FCB (Firmware Configuration Block) table at the beginning of the flash (according to chapter 7.5.2.2 of the reference manual). I looked at the existing imx53 boards within the barebox sources but I founx that no one used this mode there. Has someone done this or can give me some advice? -- Gebhardt [Anhang "fcbgen.c" gelöscht von Guenter Gebhardt/Rafi] [Anhang "fcb.bin" gelöscht von Guenter Gebhardt/Rafi]
_______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox