After adding the base support, the CPU can now be enabled in the build system.
Signed-off-by: Juergen Beisert <j...@pengutronix.de>
---
arch/arm/Kconfig | 6 ++++++
arch/arm/mach-samsung/Kconfig | 21 ++++++++++++++++++++-
drivers/serial/Kconfig | 2 +-
3 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9590db9..2e79005 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -81,6 +81,12 @@ config ARCH_S3C24xx
# select CPU_V7
# select GENERIC_GPIO
+config ARCH_S3C64xx
+ bool "Samsung S3C64xx"
+ select ARCH_SAMSUNG
+ select CPU_V6
+ select GENERIC_GPIO
+
config ARCH_VERSATILE
bool "ARM Versatile boards (ARM926EJ-S)"
select CPU_ARM926T
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 28bbc97..8acb7c9 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -19,6 +19,8 @@ config BOARDINFO
config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
hex
default 0x1ff0 if ARCH_S5PCxx
+# TODO
+ default 0x2000 if ARCH_S3C64xx
config SAMSUNG_IMPROVED_UART
bool
@@ -89,6 +91,24 @@ endmenu
endif
+if ARCH_S3C64xx
+
+config CPU_S3C6410
+ select SAMSUNG_IMPROVED_UART
+ bool
+
+choice
+
+ prompt "S3C64xx Board Type"
+
+endchoice
+
+menu "Board specific settings "
+
+endmenu
+
+endif
+
if ARCH_S5PCxx
config CPU_S5PC110
@@ -114,7 +134,6 @@ endchoice
endif
-
menu "S3C Features "
config S3C_LOWLEVEL_INIT
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index a118aaf..283573e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -90,7 +90,7 @@ config DRIVER_SERIAL_S3C_CLK
prompt "input clock reference"
depends on DRIVER_SERIAL_S3C
default 0 if ARCH_S3C24xx
- default 3 if ARCH_S5PCxx
+ default 3 if ARCH_S3C64xx || ARCH_S5PCxx
help
Select one of up to four available clock sources for the UART:
0+1: PCLK, 2: UCLK0, 3: UCLK1
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
