After adding the base support, the CPU can now be enabled in the build system.
Signed-off-by: Juergen Beisert <j...@pengutronix.de> --- arch/arm/Kconfig | 6 ++++++ arch/arm/mach-samsung/Kconfig | 21 ++++++++++++++++++++- 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2dbac66..4b7a39c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -79,6 +79,12 @@ config ARCH_S5PCxx select CPU_V7 select GENERIC_GPIO +config ARCH_S3C64xx + bool "Samsung S3C64xx" + select ARCH_SAMSUNG + select CPU_V6 + select GENERIC_GPIO + config ARCH_VERSATILE bool "ARM Versatile boards (ARM926EJ-S)" select CPU_ARM926T diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig index 37d1aa3..8f63963 100644 --- a/arch/arm/mach-samsung/Kconfig +++ b/arch/arm/mach-samsung/Kconfig @@ -17,6 +17,8 @@ config BOARDINFO config ARCH_BAREBOX_MAX_BARE_INIT_SIZE hex default 0x1ff0 if ARCH_S5PCxx +# TODO + default 0x2000 if ARCH_S3C64xx config SAMSUNG_IMPROVED_UART bool @@ -87,6 +89,24 @@ endmenu endif +if ARCH_S3C64xx + +config CPU_S3C6410 + select SAMSUNG_IMPROVED_UART + bool + +choice + + prompt "S3C64xx Board Type" + +endchoice + +menu "Board specific settings " + +endmenu + +endif + if ARCH_S5PCxx config CPU_S5PC110 @@ -106,7 +126,6 @@ config CPU_S5PV210 endif - menu "S3C Features " config S3C_LOWLEVEL_INIT -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox