Read silicon revision from ???-register.
This is based on a7683867463481bfea84af4d60af832ddfb3da7f from u-boot.
The address 0x020c8260 is used and decoded. I haven't found that in my
datasheet, so I must trust the code to be correct.
At least on a SabreLite v1.0 I get the correct version though.
Signed-off-by: Steffen Trumtrar <s.trumt...@pengutronix.de>
---
arch/arm/mach-imx/imx6.c | 34 +++++++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/imx6.c b/arch/arm/mach-imx/imx6.c
index b6067d7..fef0a00 100644
--- a/arch/arm/mach-imx/imx6.c
+++ b/arch/arm/mach-imx/imx6.c
@@ -19,7 +19,7 @@
#include <common.h>
#include <io.h>
#include <sizes.h>
-#include <mach/imx6-regs.h>
+#include <mach/imx-regs.h>
#include "gpio.h"
@@ -35,6 +35,38 @@ void *imx_gpio_base[] = {
int imx_gpio_count = ARRAY_SIZE(imx_gpio_base) * 32;
+static u32 mx6_silicon_revision;
+static char *mx6_rev_string = "unknown";
+
+int imx_silicon_revision(void)
+{
+ return mx6_silicon_revision;
+}
+
+static int query_silicon_revision(void)
+{
+ void __iomem *anatop = (void *) MX6_ANATOP_BASE_ADDR;
+ u32 rev, reg;
+
+ reg = readl(anatop + 0x260);
+ rev = (reg & 0xff) + 0x10;
+ switch (rev) {
+ case 0x10:
+ mx6_silicon_revision = IMX_CHIP_REV_1_0;
+ mx6_rev_string = "1.0";
+ break;
+ case 0x11:
+ mx6_silicon_revision = IMX_CHIP_REV_1_1;
+ mx6_rev_string = "1.1";
+ break;
+ default:
+ mx6_silicon_revision = 0;
+ }
+
+ return 0;
+}
+core_initcall(query_silicon_revision);
+
void imx6_init_lowlevel(void)
{
void __iomem *aips1 = (void *)MX6_AIPS1_ON_BASE_ADDR;
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
