On Mon, Dec 03, 2012 at 10:45:41AM -0500, Robert P. J. Day wrote: > > looking through common/startup.c and decided i wanted to see > confirmation of all the initcalls running here: > > for (initcall = __barebox_initcalls_start; > initcall < __barebox_initcalls_end; initcall++) { > debug("initcall-> %pS\n", *initcall); > result = (*initcall)(); > if (result) > pr_err("initcall %pS failed: %s\n", *initcall, > strerror(-result)); > } > > > so i started from scratch, ran "make menuconfig" for both the x-loader > and barebox to enable "low level debug messages", but i don't see any > difference in the boot output. > > i've perused the barebox wiki and don't see anything regarding that > setting. am i doing something wrong?
You have to add a "#define DEBUG" to the file you want to have the debug messages from. Add this *above* the includes, just like in the kernel. Something not mentioned in the wiki is that before the first console is initialized barebox will print the messages into a ring buffer which it will dump when the first console is initialized. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox