Signed-off-by: Teresa Gámez <t.ga...@phytec.de>
---
arch/arm/boards/beagle/board.c | 3 +--
arch/arm/boards/panda/board.c | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boards/beagle/board.c b/arch/arm/boards/beagle/board.c
index e0e1da6..88096bb 100644
--- a/arch/arm/boards/beagle/board.c
+++ b/arch/arm/boards/beagle/board.c
@@ -293,8 +293,7 @@ static int beagle_devices_init(void)
#ifdef CONFIG_USB_EHCI_OMAP
if (ehci_omap_init(&omap_ehci_pdata) >= 0)
- add_usb_ehci_device(DEVICE_ID_DYNAMIC, OMAP3_EHCI_BASE,
- OMAP3_EHCI_BASE + 0x10, &ehci_pdata);
+ omap3_add_ehci(&ehci_pdata);
#endif /* CONFIG_USB_EHCI_OMAP */
#ifdef CONFIG_OMAP_GPMC
/* WP is made high and WAIT1 active Low */
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index 8054a6a..4ca2a81 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -86,8 +86,7 @@ static void panda_ehci_init(void)
/* enable power to hub */
gpio_set_value(GPIO_HUB_POWER, 1);
- add_usb_ehci_device(DEVICE_ID_DYNAMIC, 0x4a064c00,
- 0x4a064c00 + 0x10, &ehci_pdata);
+ omap44xx_add_ehci(&ehci_pdata);
}
#else
static void panda_ehci_init(void)
--
1.7.0.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
