Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
---
arch/arm/mach-mxs/include/mach/ssp.h | 2 +
drivers/spi/Kconfig | 5 +
drivers/spi/Makefile | 1 +
drivers/spi/mxs_spi.c | 306 ++++++++++++++++++++++++++++++++++
4 files changed, 314 insertions(+)
create mode 100644 drivers/spi/mxs_spi.c
diff --git a/arch/arm/mach-mxs/include/mach/ssp.h
b/arch/arm/mach-mxs/include/mach/ssp.h
index f91770f..067cf12 100644
--- a/arch/arm/mach-mxs/include/mach/ssp.h
+++ b/arch/arm/mach-mxs/include/mach/ssp.h
@@ -23,6 +23,7 @@
#define SSP_CTRL0_BUS_WIDTH(x) (((x) & 0x3) << 22)
#define SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
#define SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
+#define SSP_CTRL0_SSP_ASSERT_OUT(x) (((x) & 0x3) << 20)
#define SSP_CTRL0_LONG_RESP (1 << 19)
#define SSP_CTRL0_GET_RESP (1 << 17)
#define SSP_CTRL0_ENABLE (1 << 16)
@@ -51,6 +52,7 @@
/* bit definition for register HW_SSP_CTRL1 */
#define SSP_CTRL1_POLARITY (1 << 9)
#define SSP_CTRL1_PHASE (1 << 10)
+#define SSP_CTRL1_DMA_ENABLE (1 << 13)
#define SSP_CTRL1_WORD_LENGTH(x) (((x) & 0xf) << 4)
#define SSP_CTRL1_SSP_MODE(x) ((x) & 0xf)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 10b8fea..218c2ff 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -33,6 +33,11 @@ config DRIVER_SPI_IMX_2_3
depends on ARCH_IMX51 || ARCH_IMX53 || ARCH_IMX6
default y
+config DRIVER_SPI_MXS
+ bool "i.MX (23,28) SPI Master driver"
+ depends on ARCH_MXS
+ depends on SPI
+
config DRIVER_SPI_OMAP3
bool "OMAP3 McSPI Master driver"
depends on ARCH_OMAP3
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index b53061e..642b7ec 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_SPI) += spi.o
obj-$(CONFIG_DRIVER_SPI_IMX) += imx_spi.o
+obj-$(CONFIG_DRIVER_SPI_MXS) += mxs_spi.o
obj-$(CONFIG_DRIVER_SPI_ALTERA) += altera_spi.o
obj-$(CONFIG_DRIVER_SPI_ATMEL) += atmel_spi.o
obj-$(CONFIG_DRIVER_SPI_OMAP3) += omap3_spi.o
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
new file mode 100644
index 0000000..6fb7f9c
--- /dev/null
+++ b/drivers/spi/mxs_spi.c
@@ -0,0 +1,306 @@
+/*
+ * Freescale i.MX28 SPI driver
+ *
+ * Copyright (C) 2013 Michael Grzeschik <m...@pengutronix.de>
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.va...@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <spi/spi.h>
+#include <clock.h>
+#include <errno.h>
+#include <io.h>
+#include <linux/clk.h>
+#include <asm/mmu.h>
+#include <mach/generic.h>
+#include <mach/imx-regs.h>
+#include <mach/mxs.h>
+#include <mach/clock.h>
+#include <mach/ssp.h>
+
+#define MXS_SPI_MAX_TIMEOUT (10 * MSECOND)
+
+#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
+#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
+
+struct mxs_spi {
+ struct spi_master master;
+ uint32_t max_khz;
+ uint32_t mode;
+ struct clk *clk;
+ void __iomem *regs;
+};
+
+static inline struct mxs_spi *to_mxs(struct spi_master *master)
+{
+ return container_of(master, struct mxs_spi, master);
+}
+
+/*
+ * Set SSP/MMC bus frequency, in kHz
+ */
+static void imx_set_ssp_busclock(struct spi_master *master, uint32_t freq)
+{
+ struct mxs_spi *mxs = to_mxs(master);
+ const uint32_t sspclk = imx_get_sspclk(master->bus_num);
+ uint32_t val;
+ uint32_t divide, rate, tgtclk;
+
+ /*
+ * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
+ * CLOCK_DIVIDE has to be an even value from 2 to 254, and
+ * CLOCK_RATE could be any integer from 0 to 255.
+ */
+ for (divide = 2; divide < 254; divide += 2) {
+ rate = sspclk / freq / divide;
+ if (rate <= 256)
+ break;
+ }
+
+ tgtclk = sspclk / divide / rate;
+ while (tgtclk > freq) {
+ rate++;
+ tgtclk = sspclk / divide / rate;
+ }
+ if (rate > 256)
+ rate = 256;
+
+ /* Always set timeout the maximum */
+ val = SSP_TIMING_TIMEOUT_MASK |
+ SSP_TIMING_CLOCK_DIVIDE(divide) |
+ SSP_TIMING_CLOCK_RATE(rate - 1);
+ writel(val, mxs->regs + HW_SSP_TIMING);
+
+ debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n",
+ bus, tgtclk, freq);
+}
+
+static int mxs_spi_setup(struct spi_device *spi)
+{
+ struct spi_master *master = spi->master;
+ struct mxs_spi *mxs = to_mxs(master);
+ uint32_t val = 0;
+
+ /* MXS SPI: 4 ports and 3 chip selects maximum */
+ if (master->bus_num > 3 || spi->chip_select > 2) {
+ printf("mxs_spi: invalid bus %d / chip select %d\n",
+ master->bus_num, spi->chip_select);
+ return -EINVAL;
+ }
+
+ mxs_reset_block(mxs->regs + HW_SSP_CTRL0, 0);
+
+ val |= SSP_CTRL0_SSP_ASSERT_OUT(spi->chip_select);
+ val |= SSP_CTRL0_BUS_WIDTH(0);
+ writel(val, mxs->regs + HW_SSP_CTRL0 + BIT_SET);
+
+ val = SSP_CTRL1_SSP_MODE(0) | SSP_CTRL1_WORD_LENGTH(7);
+ val |= (mxs->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
+ val |= (mxs->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
+ writel(val, mxs->regs + HW_SSP_CTRL1);
+
+ writel(0x0, mxs->regs + HW_SSP_CMD0);
+ writel(0x0, mxs->regs + HW_SSP_CMD1);
+
+ imx_set_ssp_busclock(master, spi->max_speed_hz);
+
+ return 0;
+}
+
+static void mxs_spi_start_xfer(struct mxs_spi *mxs)
+{
+ writel(SSP_CTRL0_LOCK_CS, mxs->regs + HW_SSP_CTRL0 + BIT_SET);
+ writel(SSP_CTRL0_IGNORE_CRC, mxs->regs + HW_SSP_CTRL0 + BIT_CLR);
+}
+
+static void mxs_spi_end_xfer(struct mxs_spi *mxs)
+{
+ writel(SSP_CTRL0_LOCK_CS, mxs->regs + HW_SSP_CTRL0 + BIT_CLR);
+ writel(SSP_CTRL0_IGNORE_CRC, mxs->regs + HW_SSP_CTRL0 + BIT_SET);
+}
+
+static uint32_t mxs_spi_cs_to_reg(unsigned cs)
+{
+ uint32_t select = 0;
+
+ if (cs & 1)
+ select |= SSP_CTRL0_WAIT_FOR_CMD;
+ if (cs & 2)
+ select |= SSP_CTRL0_WAIT_FOR_IRQ;
+
+ return select;
+}
+
+static void mxs_spi_set_cs(struct spi_device *spi)
+{
+ const uint32_t mask = SSP_CTRL0_WAIT_FOR_CMD | SSP_CTRL0_WAIT_FOR_IRQ;
+ uint32_t select;
+ struct mxs_spi *mxs = to_mxs(spi->master);
+
+ writel(mask, mxs->regs + HW_SSP_CTRL0 + BIT_CLR);
+ select = mxs_spi_cs_to_reg(spi->chip_select);
+ writel(select, mxs->regs + HW_SSP_CTRL0 + BIT_SET);
+}
+
+static int mxs_spi_xfer_pio(struct spi_device *spi,
+ char *data, int length, int write, unsigned long flags)
+{
+ struct mxs_spi *mxs = to_mxs(spi->master);
+
+ if (flags & SPI_XFER_BEGIN)
+ mxs_spi_start_xfer(mxs);
+
+ mxs_spi_set_cs(spi);
+
+ while (length--) {
+ if ((flags & SPI_XFER_END) && !length)
+ mxs_spi_end_xfer(mxs);
+
+ /* We transfer 1 byte */
+ writel(1, mxs->regs + HW_SSP_XFER_COUNT);
+
+ if (write)
+ writel(SSP_CTRL0_READ, mxs->regs + HW_SSP_CTRL0 +
BIT_CLR);
+ else
+ writel(SSP_CTRL0_READ, mxs->regs + HW_SSP_CTRL0 +
BIT_SET);
+
+ writel(SSP_CTRL0_RUN, mxs->regs + HW_SSP_CTRL0 + BIT_SET);
+
+ if (wait_on_timeout(MXS_SPI_MAX_TIMEOUT,
+ (readl(mxs->regs + HW_SSP_CTRL0) &
SSP_CTRL0_RUN) == SSP_CTRL0_RUN)) {
+ printf("MXS SPI: Timeout waiting for start\n");
+ return -ETIMEDOUT;
+ }
+
+ if (write)
+ writel(*data++, mxs->regs + HW_SSP_DATA);
+
+ writel(SSP_CTRL0_DATA_XFER, mxs->regs + HW_SSP_CTRL0 + BIT_SET);
+
+ if (!write) {
+ if (wait_on_timeout(MXS_SPI_MAX_TIMEOUT,
+ !(readl(mxs->regs + HW_SSP_STATUS) &
SSP_STATUS_FIFO_EMPTY))) {
+ printf("MXS SPI: Timeout waiting for data\n");
+ return -ETIMEDOUT;
+ }
+
+ *data++ = readl(mxs->regs + HW_SSP_DATA) & 0xff;
+ }
+
+ if (wait_on_timeout(MXS_SPI_MAX_TIMEOUT,
+ !(readl(mxs->regs + HW_SSP_CTRL0) & SSP_CTRL0_RUN))) {
+ printf("MXS SPI: Timeout waiting for finish\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int mxs_spi_transfer(struct spi_device *spi, struct spi_message *mesg)
+{
+ struct mxs_spi *mxs = to_mxs(spi->master);
+ struct spi_transfer *t = NULL;
+ char dummy;
+ unsigned long flags = 0;
+ int write = 0;
+ char *data = NULL;
+ int ret;
+ mesg->actual_length = 0;
+
+ list_for_each_entry(t, &mesg->transfers, transfer_list) {
+
+ flags = 0;
+
+ if (t->tx_buf) {
+ data = (char *) t->tx_buf;
+ write = 1;
+ } else if (t->rx_buf) {
+ data = (char *) t->rx_buf;
+ write = 0;
+ }
+
+ if (&t->transfer_list == mesg->transfers.next)
+ flags |= SPI_XFER_BEGIN;
+
+ if (&t->transfer_list == mesg->transfers.prev)
+ flags |= SPI_XFER_END;
+
+ if ((t->rx_buf && t->tx_buf)) {
+ printf("Cannot send and receive simultaneously \n");
+ break;
+ }
+
+ if ((!t->rx_buf && !t->tx_buf)) {
+ printf("No Data\n");
+ break;
+ }
+
+ if (t->len == 0) {
+ if (flags == SPI_XFER_END) {
+ t->len = 1;
+ t->rx_buf = (void *) &dummy;
+ } else {
+ return 0;
+ }
+ }
+
+ writel(SSP_CTRL1_DMA_ENABLE, mxs->regs + HW_SSP_CTRL1 +
BIT_CLR);
+ ret = mxs_spi_xfer_pio(spi, data, t->len, write, flags);
+ mesg->actual_length += t->len;
+ }
+
+ return 0;
+}
+
+static int mxs_spi_probe(struct device_d *dev)
+{
+ struct spi_master *master;
+ struct mxs_spi *mxs;
+
+ mxs = xzalloc(sizeof(*mxs));
+ if (!mxs)
+ return -ENOMEM;
+
+ master = &mxs->master;
+ master->dev = dev;
+
+ master->bus_num = dev->id;
+ master->setup = mxs_spi_setup;
+ master->transfer = mxs_spi_transfer;
+ master->num_chipselect = 3;
+ mxs->mode = SPI_CPOL | SPI_CPHA;
+
+ mxs->regs = dev_request_mem_region(dev, 0);
+
+ spi_register_master(master);
+
+ return 0;
+}
+
+static struct driver_d mxs_spi_driver = {
+ .name = "mxs_spi",
+ .probe = mxs_spi_probe,
+};
+
+static int __init mxs_spi_init(void)
+{
+ platform_driver_register(&mxs_spi_driver);
+ return 0;
+}
+
+device_initcall(mxs_spi_init);
+
+MODULE_AUTHOR("Denx Software Engeneering and Michael Grzeschik");
+MODULE_DESCRIPTION("MXS SPI driver");
+MODULE_LICENSE("GPL");
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
