detect the cpu model to dynamise the periphs mapping currently only tested on qemu but should work on real hardware
Cortex-A9 if you use 1GiB of ram you can run the same barebox on Cortex-A15 or Cortex-A9 otherwise use vexpress_ca9_defconfig where the TEXT_BASE is at 0x63f00000 when we will add the relocation support this defconfig will be drop qemu/arm-softmmu/qemu-system-arm -M vexpress-a9 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic Cortex-A15 qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagn...@jcrosoft.com> --- arch/arm/Kconfig | 10 ++ arch/arm/Makefile | 2 + arch/arm/boards/vexpress/Kconfig | 10 ++ arch/arm/boards/vexpress/Makefile | 4 + arch/arm/boards/vexpress/config.h | 5 + arch/arm/boards/vexpress/env/config | 41 +++++++ arch/arm/boards/vexpress/init.c | 142 ++++++++++++++++++++++++ arch/arm/boards/vexpress/lowlevel.c | 20 ++++ arch/arm/configs/vexpress_ca9_defconfig | 61 ++++++++++ arch/arm/configs/vexpress_defconfig | 60 ++++++++++ arch/arm/include/asm/hardware/arm_timer.h | 5 + arch/arm/include/asm/hardware/sp810.h | 68 ++++++++++++ arch/arm/mach-vexpress/Kconfig | 18 +++ arch/arm/mach-vexpress/Makefile | 3 + arch/arm/mach-vexpress/devices.c | 73 ++++++++++++ arch/arm/mach-vexpress/include/mach/clkdev.h | 7 ++ arch/arm/mach-vexpress/include/mach/debug_ll.h | 33 ++++++ arch/arm/mach-vexpress/include/mach/devices.h | 22 ++++ arch/arm/mach-vexpress/reset.c | 22 ++++ arch/arm/mach-vexpress/v2m.c | 85 ++++++++++++++ include/linux/amba/sp805.h | 32 ++++++ 21 files changed, 723 insertions(+) create mode 100644 arch/arm/boards/vexpress/Kconfig create mode 100644 arch/arm/boards/vexpress/Makefile create mode 100644 arch/arm/boards/vexpress/config.h create mode 100644 arch/arm/boards/vexpress/env/config create mode 100644 arch/arm/boards/vexpress/init.c create mode 100644 arch/arm/boards/vexpress/lowlevel.c create mode 100644 arch/arm/configs/vexpress_ca9_defconfig create mode 100644 arch/arm/configs/vexpress_defconfig create mode 100644 arch/arm/include/asm/hardware/sp810.h create mode 100644 arch/arm/mach-vexpress/Kconfig create mode 100644 arch/arm/mach-vexpress/Makefile create mode 100644 arch/arm/mach-vexpress/devices.c create mode 100644 arch/arm/mach-vexpress/include/mach/clkdev.h create mode 100644 arch/arm/mach-vexpress/include/mach/debug_ll.h create mode 100644 arch/arm/mach-vexpress/include/mach/devices.h create mode 100644 arch/arm/mach-vexpress/reset.c create mode 100644 arch/arm/mach-vexpress/v2m.c create mode 100644 include/linux/amba/sp805.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 28332ec..5ae5bd0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -105,6 +105,15 @@ config ARCH_VERSATILE select CPU_ARM926T select GPIOLIB +config ARCH_VEXPRESS + bool "ARM Vexpres boards" + select HAS_DEBUG_LL + select CPU_V7 + select ARM_AMBA + select AMBA_SP804 + select CLKDEV_LOOKUP + select COMMON_CLK + config ARCH_TEGRA bool "Nvidia Tegra-based boards" select CPU_ARM926T @@ -125,6 +134,7 @@ source arch/arm/mach-omap/Kconfig source arch/arm/mach-pxa/Kconfig source arch/arm/mach-samsung/Kconfig source arch/arm/mach-versatile/Kconfig +source arch/arm/mach-vexpress/Kconfig source arch/arm/mach-tegra/Kconfig config ARM_ASM_UNIFIED diff --git a/arch/arm/Makefile b/arch/arm/Makefile index fcb2969..73631ba 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -63,6 +63,7 @@ machine-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_SAMSUNG) := samsung machine-$(CONFIG_ARCH_VERSATILE) := versatile +machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_TEGRA) := tegra # Board directory name. This list is sorted alphanumerically @@ -146,6 +147,7 @@ board-$(CONFIG_MACH_USB_A9260) := usb-a926x board-$(CONFIG_MACH_USB_A9263) := usb-a926x board-$(CONFIG_MACH_USB_A9G20) := usb-a926x board-$(CONFIG_MACH_VERSATILEPB) := versatile +board-$(CONFIG_MACH_VEXPRESS) := vexpress board-$(CONFIG_MACH_TX25) := karo-tx25 board-$(CONFIG_MACH_TQMA53) := tqma53 board-$(CONFIG_MACH_TX51) := karo-tx51 diff --git a/arch/arm/boards/vexpress/Kconfig b/arch/arm/boards/vexpress/Kconfig new file mode 100644 index 0000000..2428901 --- /dev/null +++ b/arch/arm/boards/vexpress/Kconfig @@ -0,0 +1,10 @@ + +if MACH_VERSATILEPB + +config ARCH_TEXT_BASE + hex + default 0x01000000 + +config BOARDINFO + default "ARM Versatile/PB (ARM926EJ-S)" +endif diff --git a/arch/arm/boards/vexpress/Makefile b/arch/arm/boards/vexpress/Makefile new file mode 100644 index 0000000..98921a4 --- /dev/null +++ b/arch/arm/boards/vexpress/Makefile @@ -0,0 +1,4 @@ +obj-y += init.o + +obj-y += lowlevel.o +pbl-y += lowlevel.o diff --git a/arch/arm/boards/vexpress/config.h b/arch/arm/boards/vexpress/config.h new file mode 100644 index 0000000..25bb18f --- /dev/null +++ b/arch/arm/boards/vexpress/config.h @@ -0,0 +1,5 @@ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#endif /* __CONFIG_H */ diff --git a/arch/arm/boards/vexpress/env/config b/arch/arm/boards/vexpress/env/config new file mode 100644 index 0000000..dac770c --- /dev/null +++ b/arch/arm/boards/vexpress/env/config @@ -0,0 +1,41 @@ +#!/bin/sh + +# use 'dhcp' to do dhcp in barebox and in kernel +# use 'none' if you want to skip kernel ip autoconfiguration +ip=dhcp +# set in c +#global.hostname=vexpress +global.dhcp.vendor_id=barebox-${global.hostname} + +# or set your networking parameters here +#eth0.ipaddr=a.b.c.d +#eth0.netmask=a.b.c.d +#eth0.gateway=a.b.c.d +#eth0.serverip=a.b.c.d + +# can be either 'nfs', 'tftp' or 'nor' +kernel_loc=tftp +# can be either 'net', 'nor' or 'initrd' +rootfs_loc=initrd + +# can be either 'jffs2' or 'ubifs' +rootfs_type=ubifs +rootfsimage=root.$rootfs_type + +kernelimage=zImage +#kernelimage=uImage +#kernelimage=Image +#kernelimage=Image.lzo + +nfsroot="$eth0.serverip:/opt/work/busybox/arm9/rootfs_arm" + +nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)" +rootfs_mtdblock_nor=3 + +autoboot_timeout=3 + +bootargs="console=ttyAMA0,115200n8 CONSOLE=/dev/ttyAMA0" + +# set a fancy prompt (if support is compiled in) +PS1="\e[1;31m[barebox@\h]:\w\e[0m\n# " + diff --git a/arch/arm/boards/vexpress/init.c b/arch/arm/boards/vexpress/init.c new file mode 100644 index 0000000..f940824 --- /dev/null +++ b/arch/arm/boards/vexpress/init.c @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plag...@jcrosoft.com> + * + * GPLv2 only + */ + +#include <common.h> +#include <init.h> +#include <asm/armlinux.h> +#include <asm/system_info.h> +#include <generated/mach-types.h> +#include <mach/devices.h> +#include <environment.h> +#include <partition.h> +#include <sizes.h> +#include <io.h> +#include <globalvar.h> + +struct vexpress_init { + void (*core_init)(void); + void (*mem_init)(void); + void (*console_init)(void); + void (*devices_init)(void); + char *hostname; +}; + +struct vexpress_init *v2m_init; + +static void vexpress_ax_mem_init(void) +{ + vexpress_add_ddram(SZ_512M); +} + +#define V2M_SYS_FLASH 0x03c + +static void vexpress_ax_devices_init(void) +{ + add_cfi_flash_device(0, 0x08000000, SZ_64M, 0); + add_cfi_flash_device(1, 0x0c000000, SZ_64M, 0); + add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, 0x1a000000, + 64 * 1024, IORESOURCE_MEM, NULL); + armlinux_set_bootparams((void *)(0x80000100)); +} + +static void vexpress_ax_console_init(void) +{ + vexpress_register_uart(0); + vexpress_register_uart(1); + vexpress_register_uart(2); + vexpress_register_uart(3); +} + +struct vexpress_init vexpress_init_ax = { + .core_init = vexpress_init, + .mem_init = vexpress_ax_mem_init, + .console_init = vexpress_ax_console_init, + .devices_init = vexpress_ax_devices_init, +}; + +static void vexpress_a9_mem_init(void) +{ + vexpress_a9_add_ddram(SZ_512M, SZ_512M); +} + +static void vexpress_a9_devices_init(void) +{ + add_cfi_flash_device(0, 0x40000000, SZ_64M, 0); + add_cfi_flash_device(1, 0x44000000, SZ_64M, 0); + add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, 0x4e000000, + 64 * 1024, IORESOURCE_MEM, NULL); + + armlinux_set_architecture(MACH_TYPE_VEXPRESS); + armlinux_set_bootparams((void *)(0x60000100)); +} + +static void vexpress_a9_console_init(void) +{ + vexpress_a9_register_uart(0); + vexpress_a9_register_uart(1); + vexpress_a9_register_uart(2); + vexpress_a9_register_uart(3); +} + +struct vexpress_init vexpress_init_a9 = { + .core_init = vexpress_a9_init, + .mem_init = vexpress_a9_mem_init, + .console_init = vexpress_a9_console_init, + .devices_init = vexpress_a9_devices_init, + .hostname = "vexpress-a9", +}; + +static int vexpress_mem_init(void) +{ + v2m_init->mem_init(); + + return 0; +} +mem_initcall(vexpress_mem_init); + +static int vexpress_devices_init(void) +{ + writel(1, v2m_sysreg_base + V2M_SYS_FLASH); + v2m_init->devices_init(); + + devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self"); + devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0"); + + + globalvar_add_simple("hostname"); + setenv("global.hostname", v2m_init->hostname); + + return 0; +} +device_initcall(vexpress_devices_init); + +static int vexpress_console_init(void) +{ + v2m_init->console_init(); + + return 0; +} +console_initcall(vexpress_console_init); + +static int vexpress_core_init(void) +{ + if (cpu_is_cortex_a9()) { + v2m_init = &vexpress_init_a9; + } else { + v2m_init = &vexpress_init_ax; + if (cpu_is_cortex_a5()) + v2m_init->hostname = "vexpress-a5"; + else if (cpu_is_cortex_a7()) + v2m_init->hostname = "vexpress-a7"; + else if (cpu_is_cortex_a15()) + v2m_init->hostname = "vexpress-a15"; + } + + v2m_init->core_init(); + + return 0; +} +postcore_initcall(vexpress_core_init); diff --git a/arch/arm/boards/vexpress/lowlevel.c b/arch/arm/boards/vexpress/lowlevel.c new file mode 100644 index 0000000..04ed84b --- /dev/null +++ b/arch/arm/boards/vexpress/lowlevel.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plag...@jcrosoft.com> + * + * GPLv2 only + */ + +#include <common.h> +#include <sizes.h> +#include <asm/barebox-arm-head.h> +#include <asm/barebox-arm.h> +#include <asm/system_info.h> + +void __naked reset(void) +{ + common_reset(); + if (cpu_is_cortex_a9()) + barebox_arm_entry(0x60000000, SZ_512M, 0); + else + barebox_arm_entry(0x80000000, SZ_512M, 0); +} diff --git a/arch/arm/configs/vexpress_ca9_defconfig b/arch/arm/configs/vexpress_ca9_defconfig new file mode 100644 index 0000000..f16a8ca --- /dev/null +++ b/arch/arm/configs/vexpress_ca9_defconfig @@ -0,0 +1,61 @@ +CONFIG_ARCH_VEXPRESS=y +CONFIG_MACH_VEXPRESS +CONFIG_AEABI=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_TEXT_BASE=0x63f00000 +CONFIG_MALLOC_TLSF=y +CONFIG_PROMPT="vexpress: " +CONFIG_LONGHELP=y +CONFIG_GLOB=y +CONFIG_HUSH_FANCY_PROMPT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_MENU=y +CONFIG_PARTITION=y +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/vexpress/env" +CONFIG_CMD_EDIT=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_MENU=y +CONFIG_CMD_MENU_MANAGEMENT=y +CONFIG_CMD_PASSWD=y +CONFIG_CMD_TFTP=y +CONFIG_CMD_ECHO_E=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_BOOTM_VERBOSE=y +CONFIG_CMD_BOOTM_INITRD=y +CONFIG_CMD_BOO +CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y +CONFIG_CMD_UIMAGE=y +# CONFIG_CMD_BOOTU is not set +CONFIG_CMD_RESET=y +CONFIG_CMD_GO=y +CONFIG_CMD_OFTREE=y +CONFIG_CMD_MTEST=y +CONFIG_CMD_MTEST_ALTERNATIVE=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_UNCOMPRESS=y +CONFIG_CMD_CLK=y +CONFIG_NET=y +CONFIG_NET_DHCP=y +CONFIG_NET_NFS=y +CONFIG_NET_PING=y +CONFIG_NET_NETCONSOLE=y +CONFIG_NET_RESOLV=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_DRIVER_NET_SMC91111=y +# CONFIG_SPI is not set +CONFIG_DRIVER_CFI=y +# CONFIG_DRIVER_CFI_AMD is not set +# CONFIG_DRIVER_CFI_BANK_WIDTH_1 is not set +# CONFIG_DRIVER_CFI_BANK_WIDTH_2 is not set +CONFIG_FS_TFTP=y +CONFIG_SHA1=y +CONFIG_SHA256=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig new file mode 100644 index 0000000..e166078 --- /dev/null +++ b/arch/arm/configs/vexpress_defconfig @@ -0,0 +1,60 @@ +CONFIG_ARCH_VEXPRESS=y +CONFIG_MACH_VEXPRESS +CONFIG_AEABI=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_MALLOC_TLSF=y +CONFIG_PROMPT="vexpress: " +CONFIG_LONGHELP=y +CONFIG_GLOB=y +CONFIG_HUSH_FANCY_PROMPT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_MENU=y +CONFIG_PARTITION=y +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/vexpress/env" +CONFIG_CMD_EDIT=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_READLINE=y +CONFIG_CMD_MENU=y +CONFIG_CMD_MENU_MANAGEMENT=y +CONFIG_CMD_PASSWD=y +CONFIG_CMD_TFTP=y +CONFIG_CMD_ECHO_E=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_BOOTM_VERBOSE=y +CONFIG_CMD_BOOTM_INITRD=y +CONFIG_CMD_BOO +CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y +CONFIG_CMD_UIMAGE=y +# CONFIG_CMD_BOOTU is not set +CONFIG_CMD_RESET=y +CONFIG_CMD_GO=y +CONFIG_CMD_OFTREE=y +CONFIG_CMD_MTEST=y +CONFIG_CMD_MTEST_ALTERNATIVE=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_UNCOMPRESS=y +CONFIG_CMD_CLK=y +CONFIG_NET=y +CONFIG_NET_DHCP=y +CONFIG_NET_NFS=y +CONFIG_NET_PING=y +CONFIG_NET_NETCONSOLE=y +CONFIG_NET_RESOLV=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_DRIVER_NET_SMC91111=y +# CONFIG_SPI is not set +CONFIG_DRIVER_CFI=y +# CONFIG_DRIVER_CFI_AMD is not set +# CONFIG_DRIVER_CFI_BANK_WIDTH_1 is not set +# CONFIG_DRIVER_CFI_BANK_WIDTH_2 is not set +CONFIG_FS_TFTP=y +CONFIG_SHA1=y +CONFIG_SHA256=y diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h index 0433279..8a58390 100644 --- a/arch/arm/include/asm/hardware/arm_timer.h +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -12,7 +12,12 @@ * * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview * can have 16-bit or 32-bit selectable via a bit in the control register. + * + * Every SP804 contains two identical timers. */ +#define TIMER_1_BASE 0x00 +#define TIMER_2_BASE 0x20 + #define TIMER_LOAD 0x00 /* ACVR rw */ #define TIMER_VALUE 0x04 /* ACVR ro */ #define TIMER_CTRL 0x08 /* ACVR rw */ diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h new file mode 100644 index 0000000..3e3996a --- /dev/null +++ b/arch/arm/include/asm/hardware/sp810.h @@ -0,0 +1,68 @@ +/* + * arch/arm/include/asm/hardware/sp810.h + * + * ARM PrimeXsys System Controller SP810 header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar <viresh.li...@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_SP810_H +#define __ASM_ARM_SP810_H + +#include <io.h> + +/* sysctl registers offset */ +#define SCCTRL 0x000 +#define SCSYSSTAT 0x004 +#define SCIMCTRL 0x008 +#define SCIMSTAT 0x00C +#define SCXTALCTRL 0x010 +#define SCPLLCTRL 0x014 +#define SCPLLFCTRL 0x018 +#define SCPERCTRL0 0x01C +#define SCPERCTRL1 0x020 +#define SCPEREN 0x024 +#define SCPERDIS 0x028 +#define SCPERCLKEN 0x02C +#define SCPERSTAT 0x030 +#define SCSYSID0 0xEE0 +#define SCSYSID1 0xEE4 +#define SCSYSID2 0xEE8 +#define SCSYSID3 0xEEC +#define SCITCR 0xF00 +#define SCITIR0 0xF04 +#define SCITIR1 0xF08 +#define SCITOR 0xF0C +#define SCCNTCTRL 0xF10 +#define SCCNTDATA 0xF14 +#define SCCNTSTEP 0xF18 +#define SCPERIPHID0 0xFE0 +#define SCPERIPHID1 0xFE4 +#define SCPERIPHID2 0xFE8 +#define SCPERIPHID3 0xFEC +#define SCPCELLID0 0xFF0 +#define SCPCELLID1 0xFF4 +#define SCPCELLID2 0xFF8 +#define SCPCELLID3 0xFFC + +#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15) +#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15) + +#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) +#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) + +static inline void sysctl_soft_reset(void __iomem *base) +{ + /* switch to slow mode */ + writel(0x2, base + SCCTRL); + + /* writing any value to SCSYSSTAT reg will reset system */ + writel(0, base + SCSYSSTAT); +} + +#endif /* __ASM_ARM_SP810_H */ diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig new file mode 100644 index 0000000..c595494 --- /dev/null +++ b/arch/arm/mach-vexpress/Kconfig @@ -0,0 +1,18 @@ +if ARCH_VEXPRESS + +config ARCH_TEXT_BASE + hex + default 0x83f00000 + +config BOARDINFO + default "ARM Vexpress" if MACH_VEXPRESS + +choice + prompt "ARM Board type" + +config MACH_VEXPRESS + bool "ARM Vexpress" + +endchoice + +endif diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile new file mode 100644 index 0000000..74b4a0f --- /dev/null +++ b/arch/arm/mach-vexpress/Makefile @@ -0,0 +1,3 @@ +obj-y += v2m.o +obj-y += devices.o +obj-y += reset.o diff --git a/arch/arm/mach-vexpress/devices.c b/arch/arm/mach-vexpress/devices.c new file mode 100644 index 0000000..69c93ef --- /dev/null +++ b/arch/arm/mach-vexpress/devices.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plag...@jcrosoft.com> + * + * GPLv2 only + */ + +#include <common.h> + +#include <linux/amba/bus.h> + +#include <asm/memory.h> + +#include <mach/devices.h> + +void vexpress_a9_add_ddram(u32 ddr0_size, u32 ddr1_size) +{ + arm_add_mem_device("ram0", 0x60000000, ddr0_size); + + if (ddr1_size) + arm_add_mem_device("ram1", 0x80000000, ddr1_size); +} + + +void vexpress_a9_register_uart(unsigned id) +{ + resource_size_t start; + + switch (id) { + case 0: + start = 0x10009000; + break; + case 1: + start = 0x1000a000; + break; + case 2: + start = 0x1000b000; + break; + case 3: + start = 0x1000c000; + break; + default: + return; + } + amba_apb_device_add(NULL, "uart-pl011", id, start, 4096, NULL, 0); +} + +void vexpress_add_ddram(u32 size) +{ + arm_add_mem_device("ram1", 0x80000000, size); +} + +void vexpress_register_uart(unsigned id) +{ + resource_size_t start; + + switch (id) { + case 0: + start = 0x1c090000; + break; + case 1: + start = 0x1c0a0000; + break; + case 2: + start = 0x1c0b0000; + break; + case 3: + start = 0x1c0c0000; + break; + default: + return; + } + amba_apb_device_add(NULL, "uart-pl011", id, start, 4096, NULL, 0); +} diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h new file mode 100644 index 0000000..04b37a8 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/debug_ll.h b/arch/arm/mach-vexpress/include/mach/debug_ll.h new file mode 100644 index 0000000..15d6e85 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/debug_ll.h @@ -0,0 +1,33 @@ +/* + * Copyright 2013 Jean-Christophe PLAGNIOL-VILLARD <plagn...@jcrosoft.com> + * + * GPLv2 only + */ + +#ifndef __MACH_DEBUG_LL_H__ +#define __MACH_DEBUG_LL_H__ + +#include <linux/amba/serial.h> +#include <io.h> + +#define DEBUG_LL_PHYS_BASE 0x10000000 +#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000 + +#ifdef MP +#define UART_BASE DEBUG_LL_PHYS_BASE +#else +#define UART_BASE DEBUG_LL_PHYS_BASE_RS1 +#endif + +static inline void PUTC_LL(char c) +{ + /* Wait until there is space in the FIFO */ + while (readl(UART_BASE + UART01x_FR) & UART01x_FR_TXFF); + + /* Send the character */ + writel(c, UART_BASE + UART01x_DR); + + /* Wait to make sure it hits the line, in case we die too soon. */ + while (readl(UART_BASE + UART01x_FR) & UART01x_FR_TXFF); +} +#endif diff --git a/arch/arm/mach-vexpress/include/mach/devices.h b/arch/arm/mach-vexpress/include/mach/devices.h new file mode 100644 index 0000000..adeada8 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/devices.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plag...@jcrosoft.com> + * + * GPLv2 only + */ + +#ifndef __ASM_ARCH_DEVICES_H__ +#define __ASM_ARCH_DEVICES_H__ + +void vexpress_a9_add_ddram(u32 ddr0_size, u32 ddr1_size); +void vexpress_add_ddram(u32 size); + +void vexpress_a9_register_uart(unsigned id); +void vexpress_register_uart(unsigned id); + +void vexpress_a9_init(void); +void vexpress_init(void); + +extern void *v2m_wdt_base; +extern void *v2m_sysreg_base; + +#endif /* __ASM_ARCH_DEVICES_H__ */ diff --git a/arch/arm/mach-vexpress/reset.c b/arch/arm/mach-vexpress/reset.c new file mode 100644 index 0000000..ad6e06f --- /dev/null +++ b/arch/arm/mach-vexpress/reset.c @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plag...@jcrosoft.com> + * + * GPLv2 only + */ + +#include <common.h> +#include <io.h> +#include <linux/amba/sp805.h> + +#include <mach/devices.h> + +void __iomem *v2m_wdt_base; + +void reset_cpu(ulong addr) +{ + writel(LOAD_MIN, v2m_wdt_base + WDTLOAD); + writeb(RESET_ENABLE, v2m_wdt_base + WDTCONTROL); + + while (1) + ; +} diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c new file mode 100644 index 0000000..12d5d1a --- /dev/null +++ b/arch/arm/mach-vexpress/v2m.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plag...@jcrosoft.com> + * + * GPLv2 only + */ + +#include <common.h> +#include <init.h> +#include <io.h> + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/amba/bus.h> + +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/sp810.h> + +#include <mach/devices.h> + +void __iomem *v2m_sysreg_base; + +static const char *v2m_osc2_periphs[] = { + "mb:uart0", "uart-pl0110", /* PL011 UART0 */ + "mb:uart1", "uart-pl0111", /* PL011 UART1 */ + "mb:uart2", "uart-pl0112", /* PL011 UART2 */ + "mb:uart3", "uart-pl0113", /* PL011 UART3 */ +}; + +static void v2m_clk_init(void) +{ + struct clk *clk; + int i; + + clk = clk_fixed("dummy_apb_pclk", 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + clk = clk_fixed("mb:sp804_clk", 1000000); + clk_register_clkdev(clk, NULL, "sp804"); + + clk = clk_fixed("mb:osc2", 24000000); + for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++) + clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i]); + +} + +static void v2m_sysctl_init(void __iomem *base) +{ + u32 scctrl; + + if (WARN_ON(!base)) + return; + + /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ + scctrl = readl(base + SCCTRL); + scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; + scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; + writel(scctrl, base + SCCTRL); +} + +static void __init v2m_sp804_init(void __iomem *base) +{ + writel(0, base + TIMER_1_BASE + TIMER_CTRL); + + amba_apb_device_add(NULL, "sp804", DEVICE_ID_SINGLE, (resource_size_t)base, 4096, NULL, 0); +} + +void vexpress_a9_init(void) +{ + v2m_wdt_base = IOMEM(0x1000f000); + v2m_sysreg_base = IOMEM(0x10001000); + v2m_sysctl_init(IOMEM(0x10001000)); + v2m_clk_init(); + + v2m_sp804_init(IOMEM(0x10011000)); +} + +void vexpress_init(void) +{ + v2m_wdt_base = IOMEM(0x1c0f0000); + v2m_sysreg_base = IOMEM(0x1c020000); + v2m_sysctl_init(IOMEM(0x1c020000)); + v2m_clk_init(); + + v2m_sp804_init(IOMEM(0x1c110000)); +} diff --git a/include/linux/amba/sp805.h b/include/linux/amba/sp805.h new file mode 100644 index 0000000..b0ff290 --- /dev/null +++ b/include/linux/amba/sp805.h @@ -0,0 +1,32 @@ +/* + * Watchdog driver for ARM SP805 watchdog module + * + * Copyright (C) 2010 ST Microelectronics + * Viresh Kumar <viresh.li...@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2 or later. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __AMBA_SP805_H__ +#define __AMBA_SP805_H__ + +/* watchdog register offsets and masks */ +#define WDTLOAD 0x000 + #define LOAD_MIN 0x00000001 + #define LOAD_MAX 0xFFFFFFFF +#define WDTVALUE 0x004 +#define WDTCONTROL 0x008 + /* control register masks */ + #define INT_ENABLE (1 << 0) + #define RESET_ENABLE (1 << 1) +#define WDTINTCLR 0x00C +#define WDTRIS 0x010 +#define WDTMIS 0x014 + #define INT_MASK (1 << 0) +#define WDTLOCK 0xC00 + #define UNLOCK 0x1ACCE551 + #define LOCK 0x00000001 + +#endif /* __AMBA_SP805_H__ */ -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox