On 13:08 Fri 08 Mar , Sascha Hauer wrote:
> This adds support for the various DDR calibration functions in the
> i.MX6 MMDC.
>
> Signed-off-by: Sascha Hauer <[email protected]>
> ---
> arch/arm/mach-imx/Makefile | 3 +-
> arch/arm/mach-imx/imx6-mmdc.c | 839
> +++++++++++++++++++++++++++++
> arch/arm/mach-imx/include/mach/imx6-mmdc.h | 7 +
> 3 files changed, 848 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/mach-imx/imx6-mmdc.c
> create mode 100644 arch/arm/mach-imx/include/mach/imx6-mmdc.h
>
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 4adf522..5f95ff4 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -8,7 +8,8 @@ obj-$(CONFIG_ARCH_IMX35) += imx35.o iomux-v3.o clk-imx35.o
> obj-$(CONFIG_ARCH_IMX51) += imx51.o iomux-v3.o imx5.o clk-imx5.o
> obj-$(CONFIG_ARCH_IMX53) += imx53.o iomux-v3.o imx5.o clk-imx5.o esdctl-v4.o
> pbl-$(CONFIG_ARCH_IMX53) += imx53.o imx5.o esdctl-v4.o
> -obj-$(CONFIG_ARCH_IMX6) += imx6.o iomux-v3.o usb-imx6.o clk-imx6.o
> +obj-$(CONFIG_ARCH_IMX6) += imx6.o iomux-v3.o usb-imx6.o clk-imx6.o
> imx6-mmdc.o
> +pbl-$(CONFIG_ARCH_IMX6) += imx6-mmdc.o
only for the pbl?
or use lwl-y?
> obj-$(CONFIG_IMX_IIM) += iim.o
> obj-$(CONFIG_NAND_IMX) += nand.o
> lwl-$(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND) += external-nand-boot.o
> diff --git a/arch/arm/mach-imx/imx6-mmdc.c b/arch/arm/mach-imx/imx6-mmdc.c
> new file mode 100644
> index 0000000..66136d3
> --- /dev/null
> +++ b/arch/arm/mach-imx/imx6-mmdc.c
> @@ -0,0 +1,839 @@
> +#include <common.h>
> +#include <io.h>
> +#include <mach/imx6-regs.h>
> +#include <mach/imx6-mmdc.h>
> +
> +#define MMDC_P0_IPS_BASE_ADDR 0x021b0000
> +#define MMDC_P1_IPS_BASE_ADDR 0x021b4000
> +
> +#define MDCTL_OFFSET 0x000
> +#define MDPDC_OFFSET 0x004
> +#define MDSCR_OFFSET 0x01c
> +#define MDMISC_OFFSET 0x018
> +#define MDREF_OFFSET 0x020
> +#define MAPSR_OFFSET 0x404
> +#define MPZQHWCTRL_OFFSET 0x800
> +#define MPWLGCR_OFFSET 0x808
> +#define MPWLDECTRL0_OFFSET 0x80c
> +#define MPWLDECTRL1_OFFSET 0x810
> +#define MPPDCMPR1_OFFSET 0x88c
> +#define MPSWDAR_OFFSET 0x894
> +#define MPRDDLCTL_OFFSET 0x848
> +#define MPMUR_OFFSET 0x8b8
> +#define MPDGCTRL0_OFFSET 0x83c
> +#define MPDGHWST0_OFFSET 0x87c
> +#define MPDGHWST1_OFFSET 0x880
> +#define MPDGHWST2_OFFSET 0x884
> +#define MPDGHWST3_OFFSET 0x888
> +#define MPDGCTRL1_OFFSET 0x840
> +#define MPRDDLHWCTL_OFFSET 0x860
> +#define MPWRDLCTL_OFFSET 0x850
> +#define MPWRDLHWCTL_OFFSET 0x864
> +
> +#define IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 (MX6_IOMUXC_BASE_ADDR + 0x5a8)
> +#define IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 (MX6_IOMUXC_BASE_ADDR + 0x5b0)
> +#define IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 (MX6_IOMUXC_BASE_ADDR + 0x524)
> +#define IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 (MX6_IOMUXC_BASE_ADDR + 0x51c)
> +#define IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4 (MX6_IOMUXC_BASE_ADDR + 0x518)
> +#define IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5 (MX6_IOMUXC_BASE_ADDR + 0x50c)
> +#define IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6 (MX6_IOMUXC_BASE_ADDR + 0x5b8)
> +#define IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7 (MX6_IOMUXC_BASE_ADDR + 0x5c0)
> +
> +static inline u32 reg32_read(u32 reg)
> +{
> + return readl(reg);
> +}
> +
> +static inline void reg32_write(u32 reg, u32 val)
> +{
> + writel(val, reg);
> +}
what is the diffrence?
> +
> +static inline void reg32setbit(u32 reg, int bit)
> +{
> + u32 val;
> +
> + val = readl(reg);
> + val |= 1 << bit;
> + writel(val, reg);
> +}
> +
> +static inline void reg32clrbit(u32 reg, int bit)
> +{
> + u32 val;
> +
> + val = readl(reg);
> + val &= ~(1 << bit);
> + writel(val, reg);
> +}
it will be good to have a generic helper
> +
> +int mmdc_do_write_level_calibration(void)
> +{
> + u32 esdmisc_val, zq_val;
> + int errorcount = 0;
> + u32 val;
> + u32 ddr_mr1 = 0x4;
> +
> + /* disable DDR logic power down timer */
> + val = readl((MMDC_P0_IPS_BASE_ADDR + MDPDC_OFFSET));
> + val &= 0xffff00ff;
> + writel(val, (MMDC_P0_IPS_BASE_ADDR + MDPDC_OFFSET)),
> +
> + /* disable Adopt power down timer */
> + val = readl((MMDC_P0_IPS_BASE_ADDR + MAPSR_OFFSET));
> + val |= 0x1;
> + writel(val, (MMDC_P0_IPS_BASE_ADDR + MAPSR_OFFSET));
reg32setbit here
> +
> + debug("Start write leveling calibration \n");
pr_debug
can we drop the magic value everywhere?
> +
> + /*
> + * disable auto refresh and ZQ calibration
> + * before proceeding with Write Leveling calibration
> + */
> + esdmisc_val = readl(MMDC_P0_IPS_BASE_ADDR + MDREF_OFFSET);
> + writel(0x0000C000, (MMDC_P0_IPS_BASE_ADDR + MDREF_OFFSET));
> + zq_val = readl(MMDC_P0_IPS_BASE_ADDR + MPZQHWCTRL_OFFSET);
> + writel(zq_val & ~(0x3), (MMDC_P0_IPS_BASE_ADDR + MPZQHWCTRL_OFFSET));
> +
> + /*
> + * Configure the external DDR device to enter write leveling mode
> + * through Load Mode Register command
> + * Register setting:
> + * Bits[31:16] MR1 value (0x0080 write leveling enable)
> + * Bit[9] set WL_EN to enable MMDC DQS output
> + * Bits[6:4] set CMD bits for Load Mode Register programming
> + * Bits[2:0] set CMD_BA to 0x1 for DDR MR1 programming
> + */
> + writel(0x00808231, MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET);
> +
> + /* Activate automatic calibration by setting MPWLGCR[HW_WL_EN] */
> + writel(0x00000001, MMDC_P0_IPS_BASE_ADDR + MPWLGCR_OFFSET);
> +
> + /* Upon completion of this process the MMDC de-asserts the
> MPWLGCR[HW_WL_EN] */
> + while (readl(MMDC_P0_IPS_BASE_ADDR + MPWLGCR_OFFSET) & 0x00000001);
> +
> + /* check for any errors: check both PHYs for x64 configuration, if x32,
> check only PHY0 */
> + if ((readl(MMDC_P0_IPS_BASE_ADDR + MPWLGCR_OFFSET) & 0x00000F00) ||
> + (readl(MMDC_P1_IPS_BASE_ADDR + MPWLGCR_OFFSET) &
> 0x00000F00)) {
> + errorcount++;
> + }
> +
> + debug("Write leveling calibration completed\n");
> +
> + /*
> + * User should issue MRS command to exit write leveling mode
> + * through Load Mode Register command
> + * Register setting:
> + * Bits[31:16] MR1 value "ddr_mr1" value from initialization
> + * Bit[9] clear WL_EN to disable MMDC DQS output
> + * Bits[6:4] set CMD bits for Load Mode Register programming
> + * Bits[2:0] set CMD_BA to 0x1 for DDR MR1 programming
> + */
> + writel(((ddr_mr1 << 16)+0x8031), MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET);
> +
> + /* re-enable to auto refresh and zq cal */
> + writel(esdmisc_val, (MMDC_P0_IPS_BASE_ADDR + MDREF_OFFSET));
> + writel(zq_val, (MMDC_P0_IPS_BASE_ADDR + MPZQHWCTRL_OFFSET));
> +
> + debug("MMDC_MPWLDECTRL0 after write level cal: 0x%08X\n",
> + readl(MMDC_P0_IPS_BASE_ADDR + MPWLDECTRL0_OFFSET));
> + debug("MMDC_MPWLDECTRL1 after write level cal: 0x%08X\n",
> + readl(MMDC_P0_IPS_BASE_ADDR + MPWLDECTRL1_OFFSET));
> + debug("MMDC_MPWLDECTRL0 after write level cal: 0x%08X\n",
> + readl(MMDC_P1_IPS_BASE_ADDR + MPWLDECTRL0_OFFSET));
> + debug("MMDC_MPWLDECTRL1 after write level cal: 0x%08X\n",
> + readl(MMDC_P1_IPS_BASE_ADDR + MPWLDECTRL1_OFFSET));
> +
> + /* enable DDR logic power down timer */
> + val = readl((MMDC_P0_IPS_BASE_ADDR + MDPDC_OFFSET));
> + val |= 0x00005500;
> + writel(val, (MMDC_P0_IPS_BASE_ADDR + MDPDC_OFFSET));
> +
> + /* enable Adopt power down timer: */
> + val = readl(MMDC_P0_IPS_BASE_ADDR + MAPSR_OFFSET);
> + val &= 0xfffffff7;
> + writel(val, (MMDC_P0_IPS_BASE_ADDR + MAPSR_OFFSET));
> +
> + /* clear CON_REQ */
> + writel(0, (MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET));
> +
> + return 0;
> +}
> +
> +static void modify_dg_result(int reg_st0, int reg_st1, int reg_ctrl)
> +{
> + u32 dg_tmp_val, dg_dl_abs_offset, dg_hc_del, val_ctrl;
> +
> + /*
> + * DQS gating absolute offset should be modified from reflecting
> (HW_DG_LOWx + HW_DG_UPx)/2
> + * to reflecting (HW_DG_UPx - 0x80)
> + */
> +
> + val_ctrl = reg32_read(reg_ctrl);
> + val_ctrl &= 0xf0000000;
> +
> + dg_tmp_val = ((reg32_read(reg_st0) & 0x07ff0000) >> 16) - 0xc0;
> + dg_dl_abs_offset = dg_tmp_val & 0x7f;
> + dg_hc_del = (dg_tmp_val & 0x780) << 1;
> +
> + val_ctrl |= dg_dl_abs_offset + dg_hc_del;
> +
> + dg_tmp_val = ((reg32_read(reg_st1) & 0x07ff0000) >> 16) - 0xc0;
> + dg_dl_abs_offset = dg_tmp_val & 0x7f;
> + dg_hc_del = (dg_tmp_val & 0x780) << 1;
> +
> + val_ctrl |= (dg_dl_abs_offset + dg_hc_del) << 16;
> +
> + reg32_write(reg_ctrl, val_ctrl);
> +}
> +
> +static void mmdc_precharge_all(int cs0_enable, int cs1_enable)
> +{
> + /*
> + * Issue the Precharge-All command to the DDR device for both chip
> selects
> + * Note, CON_REQ bit should also remain set
> + * If only using one chip select, then precharge only the desired chip
> select
> + */
> + if (cs0_enable)
> + reg32_write((MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET), 0x04008050);
> + if (cs1_enable)
> + reg32_write((MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET), 0x04008058);
> +}
> +
> +static void mmdc_force_delay_measurement(int data_bus_size)
> +{
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPMUR_OFFSET, 0x800);
> +
> + if (data_bus_size == 0x2)
> + reg32_write(MMDC_P1_IPS_BASE_ADDR + MPMUR_OFFSET, 0x800);
> +}
> +
> +static void mmdc_reset_read_data_fifos(void)
> +{
> + /*
> + * Reset the read data FIFOs (two resets); only need to issue reset to
> PHY0 since in x64
> + * mode, the reset will also go to PHY1
> + * read data FIFOs reset1
> + */
> + reg32_write((MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET),
> + reg32_read((MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET))
> | 0x80000000);
> +
> + while (reg32_read((MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET)) &
> 0x80000000);
> +
> + /* read data FIFOs reset2 */
> + reg32_write((MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET),
> + reg32_read((MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET)) | 0x80000000);
> +
> + while (reg32_read((MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET)) &
> 0x80000000);
> +}
> +
> +int mmdc_do_dqs_calibration(void)
> +{
> + u32 esdmisc_val;
> + int g_error_write_cal;
> + int temp_ref;
> + int cs0_enable_initial;
> + int cs1_enable_initial;
> + int PDDWord = 0x00ffff00;
> + int errorcount = 0;
> + int cs0_enable;
> + int cs1_enable;
> + int data_bus_size;
> +
> + /* check to see which chip selects are enabled */
> + cs0_enable_initial = (reg32_read(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET)
> & 0x80000000) >> 31;
> + cs1_enable_initial = (reg32_read(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET)
> & 0x40000000) >> 30;
> +
> + /* disable DDR logic power down timer */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MDPDC_OFFSET,
> + reg32_read((MMDC_P0_IPS_BASE_ADDR + MDPDC_OFFSET)) &
> 0xffff00ff);
> +
> + /* disable Adopt power down timer */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MAPSR_OFFSET,
> + reg32_read((MMDC_P0_IPS_BASE_ADDR + MAPSR_OFFSET)) |
> 0x1);
> +
> + /* set DQS pull ups */
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0) | 0x7000);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1) | 0x7000);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2) | 0x7000);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3) | 0x7000);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4) | 0x7000);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5) | 0x7000);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6) | 0x7000);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7) | 0x7000);
> +
> + esdmisc_val = reg32_read(MMDC_P0_IPS_BASE_ADDR + MDMISC_OFFSET);
> +
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MDMISC_OFFSET, 6); /* set RALAT to
> max */
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MDMISC_OFFSET, 7);
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MDMISC_OFFSET, 8);
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MDMISC_OFFSET, 16); /* set WALAT to
> max */
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MDMISC_OFFSET, 17);
> +
> + /*
> + * disable auto refresh
> + * before proceeding with calibration
> + */
> + temp_ref = reg32_read(MMDC_P0_IPS_BASE_ADDR + MDREF_OFFSET);
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MDREF_OFFSET, 0x0000C000);
> +
> + /*
> + * per the ref manual, issue one refresh cycle MDSCR[CMD]= 0x2,
> + * this also sets the CON_REQ bit.
> + */
> + if (cs0_enable_initial)
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET, 0x00008020);
> + if (cs1_enable_initial)
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET, 0x00008028);
> +
> + /* poll to make sure the con_ack bit was asserted */
> + while (!(reg32_read(MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET) &
> 0x00004000)) ;
> +
> + /*
> + * check MDMISC register CALIB_PER_CS to see which CS calibration is
> + * targeted to (under normal cases, it should be cleared as this is the
> + * default value, indicating calibration is directed to CS0). Disable
> + * the other chip select not being target for calibration to avoid any
> + * potential issues This will get re-enabled at end of calibration.
> + */
> + if ((reg32_read(MMDC_P0_IPS_BASE_ADDR + MDMISC_OFFSET) & 0x00100000) ==
> 0)
> + reg32clrbit(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET, 30); /* clear
> SDE_1 */
> + else
> + reg32clrbit(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET, 31); /* clear
> SDE_0 */
> +
> + /*
> + * check to see which chip selects are now enabled for the remainder
> + * of the calibration.
> + */
> + cs0_enable = (reg32_read(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET) &
> 0x80000000) >> 31;
> + cs1_enable = (reg32_read(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET) &
> 0x40000000) >> 30;
> +
> + /* check to see what is the data bus size */
> + data_bus_size = (reg32_read(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET) &
> 0x30000) >> 16;
> +
> + mmdc_precharge_all(cs0_enable, cs1_enable);
> +
> + /* Write the pre-defined value into MPPDCMPR1 */
> + reg32_write((MMDC_P0_IPS_BASE_ADDR + MPPDCMPR1_OFFSET), PDDWord);
> +
> + /*
> + * Issue a write access to the external DDR device by setting the bit
> SW_DUMMY_WR (bit 0)
> + * in the MPSWDAR0 and then poll this bit until it clears to indicate
> completion of the
> + * write access.
> + */
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MPSWDAR_OFFSET, 0);
> +
> + while (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPSWDAR_OFFSET) & 0x00000001);
> +
> + /*
> + * Set the RD_DL_ABS_OFFSET# bits to their default values (will be
> calibrated later in
> + * the read delay-line calibration)
> + * Both PHYs for x64 configuration, if x32, do only PHY0
> + */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPRDDLCTL_OFFSET, 0x40404040);
> + if (data_bus_size == 0x2)
> + reg32_write(MMDC_P1_IPS_BASE_ADDR + MPRDDLCTL_OFFSET,
> 0x40404040);
> +
> + /* Force a measurement, for previous delay setup to take effect */
> + mmdc_force_delay_measurement(data_bus_size);
> +
> + /*
> + * Read DQS Gating calibration
> + */
> +
> + debug("Starting DQS gating calibration...\n");
> +
> + mmdc_reset_read_data_fifos();
> +
> + /*
> + * Start the automatic read DQS gating calibration process by asserting
> + * MPDGCTRL0[HW_DG_EN] and MPDGCTRL0[DG_CMP_CYC] and then poll
> + * MPDGCTRL0[HW_DG_EN]] until this bit clears to indicate completion.
> + * Also, ensure that MPDGCTRL0[HW_DG_ERR] is clear to indicate no errors
> + * were seen during calibration. Set bit 30: chooses option to wait 32
> + * cycles instead of 16 before comparing read data
> + */
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET, 30);
> +
> + /* Set bit 28 to start automatic read DQS gating calibration */
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET, 28);
> +
> + /*
> + * Poll for completion
> + * MPDGCTRL0[HW_DG_EN] should be 0
> + */
> + while (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET) &
> 0x10000000);
> +
> + /*
> + * Check to see if any errors were encountered during calibration
> + * (check MPDGCTRL0[HW_DG_ERR])
> + * check both PHYs for x64 configuration, if x32, check only PHY0
> + */
> + if (data_bus_size == 0x2) {
> + if ((reg32_read(MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET) &
> 0x00001000) ||
> + (reg32_read(MMDC_P1_IPS_BASE_ADDR +
> MPDGCTRL0_OFFSET) & 0x00001000))
> + errorcount++;
> + } else {
> + if (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET) &
> 0x00001000)
> + errorcount++;
> + }
> +
> + /*
> + * DQS gating absolute offset should be modified from reflecting
> + * (HW_DG_LOWx + HW_DG_UPx)/2 to reflecting (HW_DG_UPx - 0x80)
> + */
> + modify_dg_result(MMDC_P0_IPS_BASE_ADDR + MPDGHWST0_OFFSET,
> + MMDC_P0_IPS_BASE_ADDR + MPDGHWST1_OFFSET,
> + MMDC_P0_IPS_BASE_ADDR + MPDGCTRL0_OFFSET);
> +
> + modify_dg_result(MMDC_P0_IPS_BASE_ADDR + MPDGHWST2_OFFSET,
> + MMDC_P0_IPS_BASE_ADDR + MPDGHWST3_OFFSET,
> + MMDC_P0_IPS_BASE_ADDR + MPDGCTRL1_OFFSET);
> +
> + if (data_bus_size == 0x2) {
> + modify_dg_result(MMDC_P1_IPS_BASE_ADDR + MPDGHWST0_OFFSET,
> + MMDC_P1_IPS_BASE_ADDR + MPDGHWST1_OFFSET,
> + MMDC_P1_IPS_BASE_ADDR + MPDGCTRL0_OFFSET);
> + modify_dg_result(MMDC_P1_IPS_BASE_ADDR + MPDGHWST2_OFFSET,
> + MMDC_P1_IPS_BASE_ADDR + MPDGHWST3_OFFSET,
> + MMDC_P1_IPS_BASE_ADDR + MPDGCTRL1_OFFSET);
> + }
> +
> + debug("DQS gating calibration completed.\n");
> +
> + /*
> + * Read delay Calibration
> + */
> +
> + debug("Starting read calibration...\n");
> +
> + mmdc_reset_read_data_fifos();
> +
> + mmdc_precharge_all(cs0_enable, cs1_enable);
> +
> + /*
> + * Read delay-line calibration
> + * Start the automatic read calibration process by asserting
> MPRDDLHWCTL[ HW_RD_DL_EN]
> + */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPRDDLHWCTL_OFFSET, 0x00000030);
> +
> + /*
> + * poll for completion
> + * MMDC indicates that the write data calibration had finished by
> setting
> + * MPRDDLHWCTL[HW_RD_DL_EN] = 0
> + * Also, ensure that no error bits were set
> + */
> + while (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPRDDLHWCTL_OFFSET) &
> 0x00000010) ;
> +
> + /* check both PHYs for x64 configuration, if x32, check only PHY0 */
> + if (data_bus_size == 0x2) {
> + if ((reg32_read(MMDC_P0_IPS_BASE_ADDR + MPRDDLHWCTL_OFFSET) &
> 0x0000000f) ||
> + (reg32_read(MMDC_P1_IPS_BASE_ADDR +
> MPRDDLHWCTL_OFFSET) & 0x0000000f)) {
> + errorcount++;
> + }
> + } else {
> + if (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPRDDLHWCTL_OFFSET) &
> 0x0000000f) {
> + errorcount++;
> + }
> + }
> +
> + debug("Read calibration completed\n");
> +
> + /*
> + * Write delay Calibration
> + */
> +
> + debug("Starting write calibration...\n");
> +
> + mmdc_reset_read_data_fifos();
> +
> + mmdc_precharge_all(cs0_enable, cs1_enable);
> +
> + /*
> + * Set the WR_DL_ABS_OFFSET# bits to their default values
> + * Both PHYs for x64 configuration, if x32, do only PHY0
> + */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPWRDLCTL_OFFSET, 0x40404040);
> + if (data_bus_size == 0x2)
> + reg32_write(MMDC_P1_IPS_BASE_ADDR + MPWRDLCTL_OFFSET,
> 0x40404040);
> +
> + mmdc_force_delay_measurement(data_bus_size);
> +
> + /* Start the automatic write calibration process by asserting
> MPWRDLHWCTL0[HW_WR_DL_EN] */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPWRDLHWCTL_OFFSET, 0x00000030);
> +
> + /*
> + * poll for completion
> + * MMDC indicates that the write data calibration had finished by
> setting
> + * MPWRDLHWCTL[HW_WR_DL_EN] = 0
> + * Also, ensure that no error bits were set
> + */
> + while (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPWRDLHWCTL_OFFSET) &
> 0x00000010) ;
> +
> + /* check both PHYs for x64 configuration, if x32, check only PHY0 */
> + if (data_bus_size == 0x2) {
> + if ((reg32_read(MMDC_P0_IPS_BASE_ADDR + MPWRDLHWCTL_OFFSET) &
> 0x0000000f) ||
> + (reg32_read(MMDC_P1_IPS_BASE_ADDR +
> MPWRDLHWCTL_OFFSET) & 0x0000000f)) {
> + errorcount++;
> + g_error_write_cal = 1; // set the g_error_write_cal
> + }
> + } else {
> + if (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPWRDLHWCTL_OFFSET) &
> 0x0000000f) {
> + errorcount++;
> + g_error_write_cal = 1; // set the g_error_write_cal
> + }
> + }
> +
> + debug("Write calibration completed\n");
> +
> + mmdc_reset_read_data_fifos();
> +
> + debug("\n");
> +
> + /* enable DDR logic power down timer */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MDPDC_OFFSET,
> + reg32_read(MMDC_P0_IPS_BASE_ADDR + MDPDC_OFFSET) |
> 0x00005500);
> +
> + /* enable Adopt power down timer */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MAPSR_OFFSET,
> + reg32_read(MMDC_P0_IPS_BASE_ADDR + MAPSR_OFFSET) & 0xfffffff7);
> +
> + /* restore MDMISC value (RALAT, WALAT) */
> + reg32_write(MMDC_P1_IPS_BASE_ADDR + MDMISC_OFFSET, esdmisc_val);
> +
> + /* clear DQS pull ups */
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0) & 0xffff0fff);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1) & 0xffff0fff);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2) & 0xffff0fff);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3) & 0xffff0fff);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4) & 0xffff0fff);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5) & 0xffff0fff);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6) & 0xffff0fff);
> + reg32_write(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7,
> reg32_read(IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7) & 0xffff0fff);
> +
> + /* re-enable SDE (chip selects) if they were set initially */
> + if (cs1_enable_initial == 1)
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET, 30); /* set
> SDE_1 */
> +
> + if (cs0_enable_initial == 1)
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MDCTL_OFFSET, 31); /* set
> SDE_0 */
> +
> + /* re-enable to auto refresh */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MDREF_OFFSET, temp_ref);
> +
> + /* clear the MDSCR (including the con_req bit) */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET, 0x0); /* CS0 */
> +
> + /* poll to make sure the con_ack bit is clear */
> + while (reg32_read(MMDC_P0_IPS_BASE_ADDR + MDSCR_OFFSET) & 0x00004000) ;
> +
> + debug("MMDC registers updated from calibration \n");
> + debug("\nRead DQS Gating calibration\n");
> + debug("MPDGCTRL0 PHY0 (0x021b083c) = 0x%08X\n", reg32_read(0x021b083c));
> + debug("MPDGCTRL1 PHY0 (0x021b0840) = 0x%08X\n", reg32_read(0x021b0840));
> + debug("MPDGCTRL0 PHY1 (0x021b483c) = 0x%08X\n", reg32_read(0x021b483c));
> + debug("MPDGCTRL1 PHY1 (0x021b4840) = 0x%08X\n", reg32_read(0x021b4840));
> + debug("\nRead calibration\n");
> + debug("MPRDDLCTL PHY0 (0x021b0848) = 0x%08X\n", reg32_read(0x021b0848));
> + debug("MPRDDLCTL PHY1 (0x021b4848) = 0x%08X\n", reg32_read(0x021b4848));
> + debug("\nWrite calibration\n");
> + debug("MPWRDLCTL PHY0 (0x021b0850) = 0x%08X\n", reg32_read(0x021b0850));
> + debug("MPWRDLCTL PHY1 (0x021b4850) = 0x%08X\n", reg32_read(0x021b4850));
> + debug("\n");
> + /*
> + * registers below are for debugging purposes
> + * these print out the upper and lower boundaries captured during read
> DQS gating calibration
> + */
> + debug("Status registers, upper and lower bounds, for read DQS gating.
> \n");
> + debug("MPDGHWST0 PHY0 (0x021b087c) = 0x%08X\n", reg32_read(0x021b087c));
> + debug("MPDGHWST1 PHY0 (0x021b0880) = 0x%08X\n", reg32_read(0x021b0880));
> + debug("MPDGHWST2 PHY0 (0x021b0884) = 0x%08X\n", reg32_read(0x021b0884));
> + debug("MPDGHWST3 PHY0 (0x021b0888) = 0x%08X\n", reg32_read(0x021b0888));
> + debug("MPDGHWST0 PHY1 (0x021b487c) = 0x%08X\n", reg32_read(0x021b487c));
> + debug("MPDGHWST1 PHY1 (0x021b4880) = 0x%08X\n", reg32_read(0x021b4880));
> + debug("MPDGHWST2 PHY1 (0x021b4884) = 0x%08X\n", reg32_read(0x021b4884));
> + debug("MPDGHWST3 PHY1 (0x021b4888) = 0x%08X\n", reg32_read(0x021b4888));
> +
> + return errorcount;
> +}
> +
> +#ifdef MMDC_SOFTWARE_CALIBRATION
> +
> +static void mmdc_set_dqs(u32 value)
> +{
> + value |= value << 8 | value << 16 | value << 24;
> +
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPRDDLCTL_OFFSET, value);
> +
> + if (data_bus_size == 0x2)
> + reg32_write(MMDC_P1_IPS_BASE_ADDR + MPRDDLCTL_OFFSET, value);
> +}
> +
> +static void mmdc_set_wr_delay(u32 value)
> +{
> + value |= value << 8 | value << 16 | value << 24;
> +
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPWRDLCTL_OFFSET, value);
> +
> + if (data_bus_size == 0x2)
> + reg32_write(MMDC_P1_IPS_BASE_ADDR + MPWRDLCTL_OFFSET, value);
> +}
> +
> +static void mmdc_issue_write_access(void __iomem *base)
> +{
> + /*
> + * Issue a write access to the external DDR device by setting the bit
> SW_DUMMY_WR (bit 0)
> + * in the MPSWDAR0 and then poll this bit until it clears to indicate
> completion of the
> + * write access.
> + */
> +
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MPSWDAR_OFFSET, 0);
> +
> + while (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPSWDAR_OFFSET) & 0x00000001);
> +}
> +
> +static void mmdc_issue_read_access(void __iomem *base)
> +{
> + /*
> + * Issue a write access to the external DDR device by setting the bit
> SW_DUMMY_WR (bit 0)
> + * in the MPSWDAR0 and then poll this bit until it clears to indicate
> completion of the
> + * write access.
> + */
> +
> + reg32setbit(MMDC_P0_IPS_BASE_ADDR + MPSWDAR_OFFSET, 1);
> +
> + while (reg32_read(MMDC_P0_IPS_BASE_ADDR + MPSWDAR_OFFSET) & 0x00000002);
> +}
> +
> +static int total_lower[2] = { 0x0, 0x0 };
> +static int total_upper[2] = { 0xff, 0xff };
> +
> +static int mmdc_is_valid(void __iomem *base, int delay, int rd)
> +{
> + u32 val;
> +
> + if (rd)
> + mmdc_set_dqs(delay);
> + else
> + mmdc_set_wr_delay(delay);
> +
> + mmdc_force_delay_measurement();
> +
> + mdelay(1);
> +
> + if (!rd)
> + mmdc_issue_write_access(base);
> +
> + mmdc_issue_read_access(base);
> +
> + val = readl(base + MPSWDAR_OFFSET);
> +
> + if ((val & 0x3c) == 0x3c)
> + return 1;
> + else
> + return 0;
> +#ifdef MMDC_SOFWARE_CALIB_COMPARE_RESULTS
> + if ((val & 0x3c) == 0x3c) {
> + if (lower < 0)
> + lower = i;
> + }
> +
> + if ((val & 0x3c) != 0x3c) {
> + if (lower > 0 && upper < 0)
> + upper = i;
> + }
> +
> + debug("0x%02x: compare: 0x%08x ", i, readl(MMDC_P0_IPS_BASE_ADDR +
> MPSWDAR_OFFSET));
> + for (j = 0; j < 8; j++) {
> + debug("0x%08x ", readl(MMDC_P0_IPS_BASE_ADDR + 0x898 + j * 4));
> + }
> + debug("\n");
> +#endif
> +}
> +
> +static void mmdc_sw_read_calib(int ch, u32 wr_value)
> +{
> + int rd = 1;
> + void __iomem *base;
> + int i;
> + int lower = 0x0, upper = 0x7f;
> +
> + if (ch)
> + base = (void *)MMDC_P1_IPS_BASE_ADDR;
> + else
> + base = (void *)MMDC_P0_IPS_BASE_ADDR;
> +
> + /* 1. Precharge */
> + mmdc_precharge_all(cs0_enable, cs1_enable);
> +
> + /* 2. Configure pre-defined value */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPPDCMPR1_OFFSET, wr_value);
> +
> + /* 3. Issue write access */
> + mmdc_issue_write_access(base);
> +
> + for (i = 0; i < 100; i++) {
> + if (mmdc_is_valid(base, 0x40, rd)) {
> + goto middle_passed;
> + }
> + }
> +
> + debug("ch: %d value: 0x%08x middle test failed\n", ch, wr_value);
> + return;
> +
> +middle_passed:
> + for (i = 0x40; i < 0x7f; i++) {
> + if (!mmdc_is_valid(base, i, rd)) {
> + upper = i;
> + break;
> + }
> + }
> +
> + for (i = 0; i < 100; i++) {
> + if (mmdc_is_valid(base, 0x40, rd)) {
> + goto go_on;
> + }
> + }
> +
> + debug("ch: %d value: 0x%08x middle test 1 failed\n", ch, wr_value);
> + return;
> +
> +go_on:
> + for (i = 0x40; i >= 0; i--) {
> + if (!mmdc_is_valid(base, i, rd)) {
> + lower = i;
> + break;
> + }
> + }
> +
> + if (lower > total_lower[ch])
> + total_lower[ch] = lower;
> +
> + if (upper < total_upper[ch])
> + total_upper[ch] = upper;
> +
> + debug("ch: %d value: 0x%08x lower: %-3d upper: %-3d\n", ch, wr_value,
> lower, upper);
> +}
> +
> +static void mmdc_sw_write_calib(int ch, u32 wr_value)
> +{
> + int rd = 0;
> + void __iomem *base;
> + int i;
> + int lower = 0x0, upper = 0x7f;
> +
> + if (ch)
> + base = (void *)MMDC_P1_IPS_BASE_ADDR;
> + else
> + base = (void *)MMDC_P0_IPS_BASE_ADDR;
> +
> + /* 1. Precharge */
> + mmdc_precharge_all(cs0_enable, cs1_enable);
> +
> + /* 2. Configure pre-defined value */
> + reg32_write(MMDC_P0_IPS_BASE_ADDR + MPPDCMPR1_OFFSET, wr_value);
> +
> + /* 3. Issue write access */
> + mmdc_issue_write_access(base);
> +
> + for (i = 0; i < 100; i++) {
> + if (mmdc_is_valid(base, 0x40, rd)) {
> + goto middle_passed;
> + }
> + }
> +
> + debug("ch: %d value: 0x%08x middle test failed\n", ch, wr_value);
> + return;
> +
> +middle_passed:
> + for (i = 0x40; i < 0x7f; i++) {
> + if (!mmdc_is_valid(base, i, rd)) {
> + upper = i;
> + break;
> + }
> + }
> +
> + for (i = 0; i < 100; i++) {
> + if (mmdc_is_valid(base, 0x40, rd)) {
> + goto go_on;
> + }
> + }
> +
> + debug("ch: %d value: 0x%08x middle test 1 failed\n", ch, wr_value);
> + return;
> +
> +go_on:
> + for (i = 0x40; i >= 0; i--) {
> + if (!mmdc_is_valid(base, i, rd)) {
> + lower = i;
> + break;
> + }
> + }
> +
> + if (lower > total_lower[ch])
> + total_lower[ch] = lower;
> +
> + if (upper < total_upper[ch])
> + total_upper[ch] = upper;
> +
> + debug("ch: %d value: 0x%08x lower: %-3d upper: %-3d\n", ch, wr_value,
> lower, upper);
> +}
> +
> +int mmdc_do_software_calibration(void)
> +{
> + u32 s;
> + int ch;
> +
> + for (ch = 0; ch < 2; ch++) {
> + mmdc_sw_read_calib(ch, 0x00000055);
> + mmdc_sw_read_calib(ch, 0x00005500);
> + mmdc_sw_read_calib(ch, 0x00550000);
> + mmdc_sw_read_calib(ch, 0x55000000);
> + mmdc_sw_read_calib(ch, 0x00ffff00);
> + mmdc_sw_read_calib(ch, 0xff0000ff);
> + mmdc_sw_read_calib(ch, 0x55aaaa55);
> + mmdc_sw_read_calib(ch, 0xaa5555aa);
> +
> + for (s = 1; s; s <<= 1)
> + mmdc_sw_read_calib(ch, s);
> + }
> +
> + printk("ch0 total lower: %d upper: %d avg: 0x%02x\n",
> + total_lower[0], total_upper[0],
> + (total_lower[0] + total_upper[0]) / 2);
> + printk("ch1 total lower: %d upper: %d avg: 0x%02x\n",
> + total_lower[1], total_upper[1],
> + (total_lower[1] + total_upper[1]) / 2);
> +
> + mmdc_set_dqs(0x40);
> +
> + total_lower[0] = 0;
> + total_lower[1] = 0;
> + total_upper[0] = 0xff;
> + total_upper[1] = 0xff;
> +
> + for (ch = 0; ch < 2; ch++) {
> + mmdc_sw_write_calib(ch, 0x00000055);
> + mmdc_sw_write_calib(ch, 0x00005500);
> + mmdc_sw_write_calib(ch, 0x00550000);
> + mmdc_sw_write_calib(ch, 0x55000000);
> + mmdc_sw_write_calib(ch, 0x00ffff00);
> + mmdc_sw_write_calib(ch, 0xff0000ff);
> + mmdc_sw_write_calib(ch, 0x55aaaa55);
> + mmdc_sw_write_calib(ch, 0xaa5555aa);
> +
> + for (s = 1; s; s <<= 1)
> + mmdc_sw_write_calib(ch, s);
> + }
> +
> + printk("ch0 total lower: %d upper: %d avg: 0x%02x\n",
> + total_lower[0], total_upper[0],
> + (total_lower[0] + total_upper[0]) / 2);
> + printk("ch1 total lower: %d upper: %d avg: 0x%02x\n",
> + total_lower[1], total_upper[1],
> + (total_lower[1] + total_upper[1]) / 2);
> +
> + return 0;
> +}
> +
> +#endif /* MMDC_SOFTWARE_CALIBRATION */
> diff --git a/arch/arm/mach-imx/include/mach/imx6-mmdc.h
> b/arch/arm/mach-imx/include/mach/imx6-mmdc.h
> new file mode 100644
> index 0000000..4ad939e
> --- /dev/null
> +++ b/arch/arm/mach-imx/include/mach/imx6-mmdc.h
> @@ -0,0 +1,7 @@
> +#ifndef __MACH_MMDC_H
> +#define __MACH_MMDC_H
> +
> +int mmdc_do_write_level_calibration(void);
> +int mmdc_do_dqs_calibration(void);
> +
> +#endif /* __MACH_MMDC_H */
> --
> 1.8.2.rc2
>
>
> _______________________________________________
> barebox mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
