This chipselect is used on RDK Zigbee connector. Since we cannot
define additional chipselect after SPI is initialized, define this one
in main SPI initialization in PCM038 SOM.
Signed-off-by: Alexander Shiyan <shc_w...@mail.ru>
---
arch/arm/boards/pcm038/pcm038.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boards/pcm038/pcm038.c b/arch/arm/boards/pcm038/pcm038.c
index 4b2fa6c..cfc1e5e 100644
--- a/arch/arm/boards/pcm038/pcm038.c
+++ b/arch/arm/boards/pcm038/pcm038.c
@@ -48,13 +48,19 @@
#define PCM038_GPIO_FEC_RST (GPIO_PORTC + 30)
#define PCM038_GPIO_SPI_CS0 (GPIO_PORTD + 28)
+#define PCM970_GPIO_SPI_CS1 (GPIO_PORTD + 27)
static struct fec_platform_data fec_info = {
.xcv_type = PHY_INTERFACE_MODE_MII,
.phy_addr = 1,
};
-static int pcm038_spi_cs[] = { PCM038_GPIO_SPI_CS0 };
+static int pcm038_spi_cs[] = {
+ PCM038_GPIO_SPI_CS0,
+#ifdef CONFIG_MACH_PCM970_BASEBOARD
+ PCM970_GPIO_SPI_CS1,
+#endif
+};
static struct spi_imx_master pcm038_spi_0_data = {
.chipselect = pcm038_spi_cs,
@@ -221,10 +227,13 @@ static int pcm038_devices_init(void)
PE15_PF_UART1_RTS,
/* CSPI1 */
PD25_PF_CSPI1_RDY,
- PCM038_GPIO_SPI_CS0 | GPIO_GPIO | GPIO_OUT,
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
+ PCM038_GPIO_SPI_CS0 | GPIO_GPIO | GPIO_OUT,
+#ifdef CONFIG_MACH_PCM970_BASEBOARD
+ PCM970_GPIO_SPI_CS1 | GPIO_GPIO | GPIO_OUT,
+#endif
/* Display */
PA5_PF_LSCLK,
PA6_PF_LD0,
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
