Hi Raphaël Poggi,
On 08/04/2014 05:22 PM, Raphaël Poggi wrote:
Hi,
I have tested it on a custom board which use a sam9m10 and it
worked... Tell me more when we have found something suspicious.
I tested on sama5d3xek with qt1070 connect to i2c, and the i2c host
register successfully, however can not access qt1070, if I use i2c-gpio
driver, it works well.
I am still working on it, if any news, I will let you know.
Best Regards,
Bo Shen
Thanks for your test.
Raphaël Poggi
2014-08-04 11:11 GMT+02:00 Bo Shen <voice.s...@atmel.com>:
Hi Raphaël Poggi,
I try to manage to make the i2c driver work, however, failed for non
device tree.
I am still checking it. However, some comments for the patches.
Best Regards,
Bo Shen
On 08/04/2014 04:31 PM, Raphaël Poggi wrote:
Change since v1:
* Squash the commit [1] which adds the sam9x5 config.
This patcheset adds the device tree support for i2c Atmel driver and the
corresping clocks
for the at91sam9g45 device.
Raphaël Poggi (2) :
(1) i2c: at91: add support of device tree
(2) at91sam9g45: clock: add i2c clocks
arch/arm/mach-at91/at91sam9g45.c | 4 +++
drivers/i2c/busses/i2c-at91.c | 66
+++++++++++++++++++++++++++++++++-----
2 files changed, 62 insertions(+), 8 deletions(-)
[1]: http://lists.infradead.org/pipermail/barebox/2014-August/020493.html
Best Regards,
Bo Shen
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
