This commit initialise the ecc_mode (NAND_ECC_SOFT) on atmel board init which
missing it.
Signed-off-by: Raphaël Poggi <poggi.r...@gmail.com>
---
arch/arm/boards/at91sam9260ek/init.c | 1 +
arch/arm/boards/at91sam9261ek/init.c | 1 +
arch/arm/boards/at91sam9263ek/init.c | 1 +
arch/arm/boards/at91sam9m10g45ek/init.c | 1 +
arch/arm/boards/at91sam9m10ihd/init.c | 1 +
5 files changed, 5 insertions(+)
diff --git a/arch/arm/boards/at91sam9260ek/init.c
b/arch/arm/boards/at91sam9260ek/init.c
index 1298dde..76e0195 100644
--- a/arch/arm/boards/at91sam9260ek/init.c
+++ b/arch/arm/boards/at91sam9260ek/init.c
@@ -51,6 +51,7 @@ static struct atmel_nand_data nand_pdata = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
+ .ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
};
diff --git a/arch/arm/boards/at91sam9261ek/init.c
b/arch/arm/boards/at91sam9261ek/init.c
index 9ebc16a..7b8ce98 100644
--- a/arch/arm/boards/at91sam9261ek/init.c
+++ b/arch/arm/boards/at91sam9261ek/init.c
@@ -46,6 +46,7 @@ static struct atmel_nand_data nand_pdata = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
+ .ecc_mode = NAND_ECC_SOFT,
#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
diff --git a/arch/arm/boards/at91sam9263ek/init.c
b/arch/arm/boards/at91sam9263ek/init.c
index 889b4c2..c8a9d5c 100644
--- a/arch/arm/boards/at91sam9263ek/init.c
+++ b/arch/arm/boards/at91sam9263ek/init.c
@@ -43,6 +43,7 @@ static struct atmel_nand_data nand_pdata = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
+ .ecc_mode = NAND_ECC_SOFT,
#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c
b/arch/arm/boards/at91sam9m10g45ek/init.c
index 6503ebb..cdd7806 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -67,6 +67,7 @@ static struct atmel_nand_data nand_pdata = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
+ .ecc_mode = NAND_ECC_SOFT,
#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
diff --git a/arch/arm/boards/at91sam9m10ihd/init.c
b/arch/arm/boards/at91sam9m10ihd/init.c
index fc37af4..a432e5c 100644
--- a/arch/arm/boards/at91sam9m10ihd/init.c
+++ b/arch/arm/boards/at91sam9m10ihd/init.c
@@ -44,6 +44,7 @@ static struct atmel_nand_data nand_pdata = {
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
+ .ecc_mode = NAND_ECC_SOFT,
.bus_width_16 = 0,
.on_flash_bbt = 1,
};
--
1.7.9.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
