Here goes a new round of the support for the network controller present on Marvell Armada 370/XP SoC.
The first patch enables the peripherals in a PUP register, which is required on RGMII ports. The second and third patches add support for Marvell's 88E1543 and 88E1545 PHY chips. The fourth patch adds the mvneta driver. Most of the configuration part is based on Linux's mvneta driver, while some of code organization is based on Barebox's orion-gbe driver. The last patch adds network support in the defconfigs. This has been tested on Armada XP GP, Armada XP Openblocks AX3 and Armada 370 Mirabox boards. Linux zImage loads and boots fine, and the network interfaces work from the kernel. Ezequiel Garcia (5): ARM: mvebu: Enable PUP register net: phy: Support Marvell 88EE1545 PHY net: phy: Support Marvell 88EE1543 PHY net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller configs: Add network options to Armada 370/XP boards arch/arm/configs/globalscale_mirabox_defconfig | 4 + arch/arm/configs/marvell_armada_xp_gp_defconfig | 4 + arch/arm/configs/plathome_openblocks_ax3_defconfig | 4 + arch/arm/mach-mvebu/armada-370-xp.c | 5 + .../mach-mvebu/include/mach/armada-370-xp-regs.h | 7 + drivers/net/Kconfig | 6 + drivers/net/Makefile | 1 + drivers/net/mvneta.c | 758 +++++++++++++++++++++ drivers/net/phy/marvell.c | 69 ++ 9 files changed, 858 insertions(+) create mode 100644 drivers/net/mvneta.c -- 2.0.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
