The phyCORE-AM335x is a SOM that can be connected to different
carrierboards like PCM-953, phyBOARD-WEGA and phyBOARD-MAIA.
It is enough for the bootloader to support the SOM specific
parts and can be so used also on different carrierboards.
Removed carrierboard specific settings like led and the
second ethernet slave.
Signed-off-by: Teresa Gámez <t.ga...@phytec.de>
---
arch/arm/dts/am335x-phytec-phycore.dts | 41 +---------------------------------
1 file changed, 1 insertion(+), 40 deletions(-)
diff --git a/arch/arm/dts/am335x-phytec-phycore.dts
b/arch/arm/dts/am335x-phytec-phycore.dts
index e7e7780..1a1352f 100644
--- a/arch/arm/dts/am335x-phytec-phycore.dts
+++ b/arch/arm/dts/am335x-phytec-phycore.dts
@@ -21,23 +21,6 @@
status = "disabled";
};
};
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pcm051_led_pins>;
-
- led-green {
- label = "green";
- gpios = <&gpio1 30 0>;
- linux,default-trigger = "heartbeat";
- };
-
- led-amber {
- label = "amber";
- gpios = <&gpio1 31 1>;
- };
- };
};
&am33xx_pinmux {
@@ -72,7 +55,6 @@
0xfc (MUX_MODE0 | INPUT_EN | PULL_UP) /*
mmc0_dat0.mmc0_dat0 */
0x100 (MUX_MODE0 | INPUT_EN | PULL_UP) /*
mmc0_clk.mmc0_clk */
0x104 (MUX_MODE0 | INPUT_EN | PULL_UP) /*
mmc0_cmd.mmc0_cmd */
- 0x160 (MUX_MODE7 | INPUT_EN | PULL_UP) /* spi0_cs1.??,
card detect */
>;
};
@@ -86,20 +68,6 @@
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /*
mii1_rxd1.rmii1_rxd1 */
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /*
mii1_rxd0.rmii1_rxd0 */
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /*
rmii1_refclk.rmii1_refclk */
-
- /* Slave 2 */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a0.rgmii2_tctl */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a1.rgmii2_rctl */
- 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a2.rgmii2_td3 */
- 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a3.rgmii2_td2 */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a4.rgmii2_td1 */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a5.rgmii2_td0 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a6.rgmii2_tclk */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a7.rgmii2_rclk */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a8.rgmii2_rd3 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a9.rgmii2_rd2 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a10.rgmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /*
gpmc_a11.rgmii2_rd0 */
>;
};
@@ -224,19 +192,12 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
- dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <2>;
- phy-mode = "rgmii";
- dual_emac_res_vlan = <2>;
};
&mac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rmii1_pins>;
- dual_emac = <1>;
+ slaves = <1>;
status = "okay";
};
--
1.9.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
