This commit adds support for Marvell's 88E1545 PHY chip. In particular, this
allows to support QSGMII interfaces.

Signed-off-by: Ezequiel Garcia <ezequiel.gar...@free-electrons.com>
---
 drivers/net/phy/marvell.c   | 58 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/marvell_phy.h |  1 +
 2 files changed, 59 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 2fb4ad2..8964d7a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -35,6 +35,13 @@
 #define MII_88E1121_PHY_MSCR_DELAY_MASK        \
        (MII_88E1121_PHY_MSCR_RX_DELAY | MII_88E1121_PHY_MSCR_TX_DELAY)
 
+#define MII_88E1540_LED_PAGE           0x3
+#define MII_88E1540_LED_CONTROL                0x10
+
+#define MII_88E1540_QSGMII_PAGE                0x4
+#define MII_88E1540_QSGMII_CONTROL     0x0
+#define MII_88E1540_QSGMII_AUTONEG_EN  BIT(12)
+
 /*
  * marvell_read_status
  *
@@ -123,6 +130,48 @@ static int marvell_read_status(struct phy_device *phydev)
        return 0;
 }
 
+static int m88e1540_config_init(struct phy_device *phydev)
+{
+       u16 reg;
+       int ret;
+
+       /* Configure QSGMII auto-negotiation */
+       if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
+               ret = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+                               MII_88E1540_QSGMII_PAGE);
+               if (ret < 0)
+                       return ret;
+
+               reg = phy_read(phydev, MII_88E1540_QSGMII_CONTROL);
+               ret = phy_write(phydev, MII_88E1540_QSGMII_CONTROL,
+                                       reg | MII_88E1540_QSGMII_AUTONEG_EN);
+               if (ret < 0)
+                       return ret;
+       }
+
+       /* Configure LED as:
+        * Activity: Blink
+        * Link:     On
+        * No Link:  Off
+        */
+       phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1540_LED_PAGE);
+       phy_write(phydev, MII_88E1540_LED_CONTROL, 0x1111);
+
+       /* Power-up the PHY. When going from power down to normal operation,
+        * software reset and auto-negotiation restart are also performed.
+        */
+       ret = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+                               MII_MARVELL_PHY_DEFAULT_PAGE);
+       if (ret < 0)
+               return ret;
+       ret = phy_write(phydev, MII_BMCR,
+                       phy_read(phydev, MII_BMCR) & ~BMCR_PDOWN);
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
+
 static int m88e1121_config_init(struct phy_device *phydev)
 {
        u16 reg;
@@ -175,6 +224,15 @@ static struct phy_driver marvell_phys[] = {
                .config_aneg    = genphy_config_aneg,
                .read_status    = marvell_read_status,
        },
+       {
+               .phy_id         = MARVELL_PHY_ID_88E1545,
+               .phy_id_mask    = MARVELL_PHY_ID_MASK,
+               .drv.name       = "Marvell 88E1545",
+               .features       = PHY_GBIT_FEATURES,
+               .config_init    = m88e1540_config_init,
+               .config_aneg    = genphy_config_aneg,
+               .read_status    = marvell_read_status,
+       },
 };
 
 static int __init marvell_phy_init(void)
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index bf2c66a..deb75bf 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -27,6 +27,7 @@
 #define MARVELL_PHY_ID_88E1318S                0x01410e90
 #define MARVELL_PHY_ID_88E1116R                0x01410e40
 #define MARVELL_PHY_ID_88E1510         0x01410dd0
+#define MARVELL_PHY_ID_88E1545         0x01410eb0
 
 /* Mask used for ID comparisons */
 #define MARVELL_PHY_ID_MASK            0xfffffff0
-- 
2.1.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to