This was only done for some of the boards and while it is ok to build those boards without regulator support it may potentially yield non-working barebox binaries. This is clearly not what the user wanted.
Also select the appropriate bus support needed for the MC13xxx. Signed-off-by: Lucas Stach <[email protected]> --- arch/arm/mach-imx/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 46d0f3d11af0..6dcec3bd450e 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -196,6 +196,9 @@ config MACH_PCA100 config MACH_PCM038 bool "phyCORE-i.MX27" select ARCH_IMX27 + select SPI + select DRIVER_SPI_IMX + select MFD_MC13XXX select HAVE_DEFAULT_ENVIRONMENT_NEW select ARCH_IMX_EXTERNAL_BOOT_NAND help @@ -205,6 +208,9 @@ config MACH_PCM038 config MACH_EFIKA_MX_SMARTBOOK bool "Efika MX smartbook" select ARCH_IMX51 + select SPI + select DRIVER_SPI_IMX + select MFD_MC13XXX help Choose this to compile barebox for the Efika MX Smartbook @@ -217,10 +223,16 @@ config MACH_EMBEDSKY_E9 config MACH_FREESCALE_MX51_PDK bool "Freescale i.MX51 PDK" select ARCH_IMX51 + select SPI + select DRIVER_SPI_IMX + select MFD_MC13XXX config MACH_FREESCALE_MX53_LOCO bool "Freescale i.MX53 LOCO" select ARCH_IMX53 + select I2C + select I2C_IMX + select MFD_MC13XXX config MACH_TQMA53 bool "TQ i.MX53 TQMa53" -- 2.1.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
