With DT helpers for ECC step size and strength, now use them on
Marvell NAND driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
---
Cc: Robert Jarzmik <robert.jarz...@free.fr>
Cc: Thomas Petazzoni <thomas.petazz...@free-electrons.com>
Cc: Ezequiel Garcia <ezequ...@vanguardiasur.com.ar>
Cc: barebox@lists.infradead.org
---
drivers/mtd/nand/nand_mrvl_nfc.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mtd/nand/nand_mrvl_nfc.c b/drivers/mtd/nand/nand_mrvl_nfc.c
index a472d072fd68..676846e546a2 100644
--- a/drivers/mtd/nand/nand_mrvl_nfc.c
+++ b/drivers/mtd/nand/nand_mrvl_nfc.c
@@ -987,6 +987,14 @@ static int mrvl_nand_probe_dt(struct mrvl_nand_host *host)
if (of_get_nand_on_flash_bbt(np))
host->flash_bbt = 1;
+ host->ecc_strength = of_get_nand_ecc_strength(np);
+ if (host->ecc_strength < 0)
+ host->ecc_strength = 0;
+
+ host->ecc_step = of_get_nand_ecc_step_size(np);
+ if (host->ecc_step < 0)
+ host->ecc_step = 0;
+
return 0;
}
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
