On Thu, Jun 02, 2016 at 10:06:50AM +0200, Raphael Poggi wrote:
> This patch adds arm64 specific codes, which are:
>       - exception support
>       - cache support
>       - rework Makefile to support arm64
> 
> Signed-off-by: Raphael Poggi <poggi.r...@gmail.com>
> ---
>  arch/arm/cpu/Makefile        |  17 ++++-
>  arch/arm/cpu/cache-armv8.S   | 168 
> +++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/cpu/cache.c         |  19 +++++
>  arch/arm/cpu/exceptions_64.S | 127 ++++++++++++++++++++++++++++++++
>  arch/arm/cpu/interrupts.c    |  47 ++++++++++++
>  arch/arm/cpu/lowlevel.S      |  38 ++++++++++
>  arch/arm/include/asm/cache.h |   9 +++
>  7 files changed, 423 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/cpu/cache-armv8.S
>  create mode 100644 arch/arm/cpu/exceptions_64.S
> 
> --- a/arch/arm/cpu/lowlevel.S
> +++ b/arch/arm/cpu/lowlevel.S
> @@ -3,6 +3,7 @@
>  #include <asm/system.h>
>  
>  .section ".text_bare_init_","ax"
> +#if __LINUX_ARM_ARCH__ <= 7
>  ENTRY(arm_cpu_lowlevel_init)
>       /* set the cpu to SVC32 mode, mask irq and fiq */
>       mrs     r12, cpsr
> @@ -56,3 +57,40 @@ ENTRY(arm_cpu_lowlevel_init)
>  
>       mov     pc, lr
>  ENDPROC(arm_cpu_lowlevel_init)
> +#else
> +ENTRY(arm_cpu_lowlevel_init)
> +     adr     x0, vectors
> +     mrs     x1, CurrentEL
> +     cmp     x1, #0xC                /* Check EL3 state */
> +     b.eq    1f
> +     cmp     x1, #0x8                /* Check EL2 state */
> +     b.eq    2f
> +     cmp     x1, #0x4                /* Check EL1 state */
> +     b.eq    3f
> +
> +1:
> +     msr     vbar_el3, x0
> +     mov     x0, #1                  /* Non-Secure EL0/1 */
> +     orr     x0, x0, #(1 << 10)      /* 64-bit EL2 */
> +     msr     scr_el3, x0
> +     msr     cptr_el3, xzr
> +     b       done
> +
> +2:
> +     msr     vbar_el2, x0
> +     mov     x0, #0x33ff             /* Enable FP/SIMD */
> +     msr     cptr_el2, x0
> +     b       done
> +
> +
> +3:
> +     msr     vbar_el1, x0
> +     mov     x0, #(3 << 20)          /* Enable FP/SIMD */
> +     msr     cpacr_el1, x0
> +     b       done
> +
> +done:
> +     ret
> +
> +ENDPROC(arm_cpu_lowlevel_init)
> +#endif

Better create a lowlevel64.S? The code is completely different anyway.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to